French mux 21.5E

[Analoguesat]

A bit of an oddity this one - WHY has a Fransat package arrived on 21.5E???? The 21B wide beam doesnt really cover any French speaking territories particularly well....

All channels have the following parameters and are currently transmitted fta:

Eutelsat 21B

11221H
34000 3/4

DVB-S2
QPSK

First up France 2 / France 2 HD (showing the same content)

France's second entertainment channel

 

[Analoguesat]

France 3 - three mostly identical sub regions being carried Bordeaux, Rennes & Paris. They seem to opt out for the regional news

Entertainment / news channel

 

[Analoguesat]

HD Forum. Promo channel on a short loop (~5 minutes)

SD & HD versions being carried - tagged as 1.0Mbps SD MPEG4 & 8.0MBbps HD MPEG4 respectively

 

[Archived-1]

I am only getting two channels here now 2.0mbps SD MPEG4/8.0mbps HD MPEG4

 

[Lazarus]

Only just seen this Thread - Also only getting the two HD Forum Channels.

Really strong, though but.

 

[Archived-1]

France 2 and France Rennes has just appeared :-)

 

[Archived-1]

Also Tearofsteel radio channel

 

[william-1]

Just 4 x tv now:-
France 2 SD S2 MPEG-2 (720 x 576)
France 3 Rennes SD S2 MPEG-2 (544 x 576)
8.0Mbps HD S2 MPEG-4 (1920 x 1088)
2.0Mbps SD S2 MPEG-4 (720 x 576)

This is about the 5th change I have observed from this transponder so just a test for another service in my opinion.

http://www.satellites.co.uk/forums/threads/fransat-info-21-5e.162868/#post-900364

 

[pontiend]

Just 4 x tv now:-
France 2 SD S2 MPEG-2 (720 x 576)
France 3 Rennes SD S2 MPEG-2 (544 x 576)
8.0Mbps HD S2 MPEG-4 (1920 x 1088)
2.0Mbps SD S2 MPEG-4 (720 x 576)

Still those four here this morning.
Tear ofSteel has a 76% signal but black.
Listed as HEVC on DVBDream.

 

[Archived-1]

France 3 Rennes has gone now, yes Ray I think there is a film on TOS atm, I have audio but no video and it scans in as radio here, I guess my stb does not recognise it as a tv channel due to it being HEVC, ok how do we decode this, I will have a play with my pc card,
http://www.tomsguide.com/us/hevc-4k-explained,news-18206.html

 

[pontiend]

Rennes £3 is on now.but breaking up .Signal only 59%
Re. Tear of steal I changed the video codec from lav to cyberlink.I get the sound as you do but no video.
Shame it is in English.My signal is too low to get video.
The signal level in reply #9 was wrong it had not settled down, it should have been 61%
TBS 100cm Dish

 

[BlindFaith]

The HEVC streams look weird. Low rate, and strange AR. None of my filters can decode it. Audio is ok. V_PID 102 doesn't have a readable header according to transedit.

 

[Archived-1]

This is all the information I can find about it.

 

[pontiend]

, I guess my stb does not recognise it as a tv channel due to it being HEVC, ok how do we decode this, I will have a play with my pc card,
http://www.tomsguide.com/us/hevc-4k-explained,news-18206.html

There is a UHD demo channel on 19.2E.Martin.
19.2E 10994 H 22000 9/10
http://www.satellites.co.uk/posts/896691/
Though I have to use lav codecs to get video.
Edit .It is H not V

 

[Anonymous_1]

@ 21.5°E this transponder is for Eutelsat' test.

Tear of steel is in HEVC but HD (not UHD)

 

[Archived-1]

Great, I did catch it the other day with Video, they must be swapping and changing. how are you finding the RC2000C I might need some help in the near future.

http://www.satellites.co.uk/forums/threads/rc2000-dual-axis-antenna-controller.163083/

 

[Archived-1]

It looks like the mux has gone today, lets see what turns up next here.