FTP Connection Problems

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#1
Can someone advise me on a connection problem plz?

When trying to connect to my db7000-s via dreambox keyfile updater on a laptop i'm getting 'are you sure the db ip is correct!'

My settings are

IP: 192.168.0.24
netmask: 255.255.255.0
Type: Lan
Nameserver: 192.168.0.1
Gateway:192.168.0.1
Enabled network and saved it
port 21 (tried 80)

anbody any thoughts


Thanks
 

RedDevil_UK

Specialist Contributor
Messages
1,761
Likes
34
My Satellite Setup
Dreambox 7000S, VU+ Solo2, 1.1m Dish, Moteck SG-2100A DISEQC Motor
My Location
Rochdale
#2
that looks ok to me??? is the cables OK

i set my PC to 192.168.0.1
and my DB to 192.168.0.2
255.255.255.0
crossover cable from PC to DB direct

i enabled internet sharing on PC too

it all worked first time

check its not the program first.... goto your web browser and put the address in as
ftp://root:dreambox*192.168.0.24/

change the * to AT sign... this forum wont except AT signs??

see if you log in....
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#3
Thanks
The cable is ok and the browser ip didn't work..

where did you enable internet on your pc

I have a wireless card in at the same time and if i try to enable it say that the is an ip clash, but if diasble it it won't let me enable anywhere...


 

Analoguesat

Administrator
Staff member
Messages
45,521
Likes
8,254
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#4
Do you have a firewall enabled by any chance? If so you may need to change the settings to allow access to the db.
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#5
only the one on XP, but when i disable i still can get in.
 

RedDevil_UK

Specialist Contributor
Messages
1,761
Likes
34
My Satellite Setup
Dreambox 7000S, VU+ Solo2, 1.1m Dish, Moteck SG-2100A DISEQC Motor
My Location
Rochdale
#6
where did you enable internet on your pc
you first need to make a good network connection then...
to enable internet sharing click..

start > connect to > show all connections

this opens a window showing network connections and your internet modem/connection

Right mouse click your internet connection and choose PROPERTIES

click onto the ADVANCED tab...

now click the second tick box down under the heading INTERNET CONNECTION SHARING

the tick box says...
Allow other network users to connect through this computers internet connection
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#7
RedDevil_UK said:
you first need to make a good network connection then...
to enable internet sharing click..

start > connect to > show all connections

this opens a window showing network connections and your internet modem/connection

Right mouse click your internet connection and choose PROPERTIES

click onto the ADVANCED tab...

now click the second tick box down under the heading INTERNET CONNECTION SHARING

the tick box says...
Allow other network users to connect through this computers internet connection
If that dont work run the network wizzard.
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#8
Should the dreambox power the light on the LAN socket?

and do i have to assign the dreambox lan socket?


john_graydon said:
If that dont work run the network wizzard.
 

RedDevil_UK

Specialist Contributor
Messages
1,761
Likes
34
My Satellite Setup
Dreambox 7000S, VU+ Solo2, 1.1m Dish, Moteck SG-2100A DISEQC Motor
My Location
Rochdale
#9
if you make a connection from you PC to any device, you Lan socket should light up automatically?
im just wondering, you have setup the Dreambox IP address too??

set the IP address up on your PC (ie. 192.168.0.1)
subnet mask 255.255.255.0
when FTPing use port 21 (even though its 80 on the D:cool:


set the IP address on the Dreambox (ie. 192.168.0.2)
subnet mask 255.255.255.0
Nameserver 192.168.0.1
gateway 192.168.0.1
enable network x
port 80
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#10
OK
I will try when i get home from work, but the lan socket is not lighting up when i connect to the DB, but does when i connect direct to network...

I wonder if the DB has a faulty LAN socket??

Thanks
Again RD

RedDevil_UK said:
if you make a connection from you PC to any device, you Lan socket should light up automatically?
im just wondering, you have setup the Dreambox IP address too??

set the IP address up on your PC (ie. 192.168.0.1)
subnet mask 255.255.255.0
when FTPing use port 21 (even though its 80 on the D:cool:


set the IP address on the Dreambox (ie. 192.168.0.2)
subnet mask 255.255.255.0
Nameserver 192.168.0.1
gateway 192.168.0.1
enable network x
port 80
 

RedDevil_UK

Specialist Contributor
Messages
1,761
Likes
34
My Satellite Setup
Dreambox 7000S, VU+ Solo2, 1.1m Dish, Moteck SG-2100A DISEQC Motor
My Location
Rochdale
#11
the other thing to remember is...

when connecting 2 devices direct ie PC to DB, or PC to PC then you should use a crossover(twisted) lead.
when connecting your PC to a network using a hub for example, you should use a straight (non twisted) lead

if your using the wrong lead, the Lan socket will not light up
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#12
Cheers for the info...
I changed the cable and run the newtork wizzard and got a connection through flash FXP.

I now need to now how to fire up the soft cams.

Does the Dm7000s have the Dragon and the Matrix CAM in?

I have flashed the Hydra 1.0.8 should this have the latest K*eys in or do i need to put ma*y or someting else in ?
:)
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#13
beatphreak said:
Cheers for the info...
I changed the cable and run the newtork wizzard and got a connection through flash FXP.

I now need to now how to fire up the soft cams.

Does the Dm7000s have the Dragon and the Matrix CAM in?

I have flashed the Hydra 1.0.8 should this have the latest K*eys in or do i need to put ma*y or someting else in ?
:)
Yes download the newcamd 5.26 in the cam section, then download marys in the k*ys section. Reboot dreambox and everything should be fine. Make sure you download the latest control panel before you do anything.
 

RedDevil_UK

Specialist Contributor
Messages
1,761
Likes
34
My Satellite Setup
Dreambox 7000S, VU+ Solo2, 1.1m Dish, Moteck SG-2100A DISEQC Motor
My Location
Rochdale
#14
nice to hear the networks working :)

did you enable the internet sharing on your PC?

if so, you will be able to download the new cams and keys with the remote for your dreambox :)

if not, you will have to manually download them on your PC then FTP them over to the dreambox.
even with a new image, its best to download cams and keys...
the 2 most popular at the moment are
newcamD (up to version 5.26)
scam (up to version 2.3)

Does the Dm7000s have the Dragon and the Matrix CAM in?
i dont know about that, im sure someone else will know though
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#15
RedDevil_UK said:
nice to hear the networks working :)

did you enable the internet sharing on your PC?

if so, you will be able to download the new cams and keys with the remote for your dreambox :)

if not, you will have to manually download them on your PC then FTP them over to the dreambox.
even with a new image, its best to download cams and keys...
the 2 most popular at the moment are
newcamD (up to version 5.26)
scam (up to version 2.3)



i dont know about that, im sure someone else will know though
No it does`nt have the Matrix or Dragon installed. Only downloadable softcams installed. Newcamd 5.26 better than the dragon at the moment.
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#16
thanks for this info...
I think i should be able to sort this, but i just have a couple more questions...
What and where is the control panel?
And how do i know if the k*ys are working (what will be unencrypted that usually isn't?
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#17
beatphreak said:
thanks for this info...
I think i should be able to sort this, but i just have a couple more questions...
What and where is the control panel?
And how do i know if the k*ys are working (what will be unencrypted that usually isn't?
Use green button,go into hydra set up,select download latest control panel. exit and exit again. then go back into it, the soft cams and k*ys should be the latest at the moment. it will tell you at the bottom date of panel at the moment is 05/01/04 but should 05. its ok though just the hydra team is overworked at the moment. Try S*Y Prima fila ch on 13e these should clear. encrypted ch come up with a yellow box at the top right. ie I S V N (NDS) nds not opened YET..
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#18
Tried that , but getting ERROR!
File/Var/etc/Cpanel.xml not found
 

RedDevil_UK

Specialist Contributor
Messages
1,761
Likes
34
My Satellite Setup
Dreambox 7000S, VU+ Solo2, 1.1m Dish, Moteck SG-2100A DISEQC Motor
My Location
Rochdale
#19
have you managed to download anything using the dreambox??

if not, then your dreambox is not getting onto the www
 

beatphreak

Regular Member
Messages
35
Likes
0
My Satellite Setup
dreambox 7000s - Flubber
40gb Hard Drive
80cm Clear Dish + V-Box 2
Linksys Wireless Bridge
DCC on Laptop
My Location
Lancaster UK
#20
I can see the files through FTP, but i can't get the web on the pc at the same time...
is that what is required?


RedDevil_UK said:
have you managed to download anything using the dreambox??

if not, then your dreambox is not getting onto the www
 
Top