Wanted Full Height Bracket For Dual Connector TBS Card

M

moonbase

Small Dish Man
My Satellite Setup
.
My Location
UK
Hi,

Has anyone got a full height bracket that would be suitable for a TBS6902 card please?
I think a full height bracket for any TBS card that has two connectors would fit, it probably does not need to be specifically for a TBS6902.
 
It's simple. From an older, broken card with only one connector, unscrew the two screws on the board, and then you can drill a hole for another connector to fit. Then you put it back on the board. That way, you have two outlets for both connectors.
I did this with the bracket when I adjusted it to fit in the slot and clamped it to the pc.
 
satesco said:
It's simple. From an older, broken card with only one connector, unscrew the two screws on the board, and then you can drill a hole for another connector to fit. Then you put it back on the board. That way, you have two outlets for both connectors.
I did this with the bracket when I adjusted it to fit in the slot and clamped it to the pc.
Click to expand...


Yes, it's simple if I had an older broken card.
I was hoping someone might come along with an older broken card that I can use the bracket from.

The only limiting factor is the location of the two side lugs on the bracket that screw to the TBS board.
 
Back
Top