Advice Needed Gibertini XP 1 Metre

Gladstones

Gladstones

Member
My Satellite Setup
Zone 2 Fixed at Astra 2
Gibertini XP 75 cm fixed at 30 west
Gibertini XP 1 meter motorised 53e to 27.5w
Technomate TM2600
Inverto Ultra Black
LG 55 UH770V
Octagon SX88+SE
My Location
Midlothian
Good afternoon hope everyone doing well.
Got 75cm gibby on tm 2600 now bought 100 cm Gibertini xp need some help to make it work what to expect compare to 75 cm.
thanks
 
Meter ?

There is a small chance the two elevation mounts share the same bolt spacings, so just a straight swop over and align the face to the same angle.

If the old dish was performing across the arc of course
 
Channel Hopper said:
Meter ?

There is a small chance the two elevation mounts share the same bolt spacings, so just a straight swop over and align the face to the same angle.

If the old dish was performing across the arc of course
Click to expand...
Not got one as I am not a big fan of sat meters old tele and receiver
 
Dish is up badr 4 @ 12130v27500 56% is that good enough or should be better
 
If Edision Primo readings are the same as Octagon SX88+, which I believe they are, then it's a slightly better signal than I got (52%) on a Channel Master 90cm when you were last trying for this transponder. Considering you are further North than me I'd say it's a good result.
 
Worked bit more on it got 12130V 68% & 11996H jumping between 76-80%
 
Please post a screenshot of dubai one with the signal meter showing.
 
it’s not on octagon Sx88 + using friends receiver for dish alignment don’t know what it’s called
If you want I can borrow it again and send pic of the signal
Sx88 + back on signal on 11996 is 66% , 12310 is 56%
Don’t understand why friends receiver showed 80% & 68%
 
You can't compare percentage figures of different receivers as the scale isn't universal across receiver manufacturers. However as the Primo & SX88 are almost identical we can compare those, the SQ % readings have been shown to be the same for the same DB level.
 
Back
Top