Handheld tv for dish setup

D

Dishy1

Member
My Satellite Setup
Raven 43cm minidish. Zinwell quad lnb.
My Location
Derbyshire UK
Has anyone connected a small handheld tv to their satellite setup & got sound and vision?

I have a number of dishes to install at unoccupied properties and was thinking of buying a cheap secondhand handheld with an av input socket. Since these are powered by their own internal batteries I believe I can avoid certain licensing issues.

I've had a quick look at what scart to composite av adapters are available but nothing seems to quite fit the bill.

Thanks,
Sid
 
Thread moved to correct section.

A good second hand meter/analyser would suit.
 
Yes, I have a 7inch LCD TV, it has composite video and audio AV inputs. Works fine, bought it new from ebay for about £40.
 
I have a 7" LCD. I don't bother with sound, and use composite video. I have a 30m long Co-Ax with made up with composite jacks for carrying reciever video signal up to the dish.
 
A satlook NIT or even a Micro wouldn't set you back that much. Much more professional.
 
satelliteman said:
A satlook NIT or even a Micro wouldn't set you back that much. Much more professional.
Click to expand...

Very true it looks more proffesional with a proper meter. Though I've never had anyone comment when I use the 7" LCD.
 
You can buy a 7' or 10' portable, battery powered LCD tv, with built in DVB-S receiver for about $120 in China. Made by Lilliput company ltd.
 
The trouble with professional meters is that you have to spend a significant amount more to get at least same functionality that can be achieved with a receiver+Tv. I only use my meter when it's raining.:)
 
Well, sometimes meter is necessary, for example when it's required to fine tune LNB skew for lowest polarization, or to detect interference.
 
Robbo said:
The trouble with professional meters is that you have to spend a significant amount more to get at least same functionality that can be achieved with a receiver+Tv. I only use my meter when it's raining.:)
Click to expand...

Spec analysers can of course come in handy for fault finding. Also required for obtaining more accurate signal measurements over a simple strength/quality reading that a bulk standard receiver will give you. For example, best way to accurately adjust for opposite polarity null effect and identifying outside interference is by looking at a trace :)
 
Back
Top