HD+ Card in Vu+ Solo

sonnetpete

sonnetpete

Grumpy Old Retired Moderator and quiz inquisitor..
My Satellite Setup
Laminas 1.2M fibre dish with an IBU, on a Clarke Tech USALS motor, covering 57E - 24.5W to an Octagon SX88. Displayed on a 20" Dyon LED TV.

Seperate 80 cm dish on 28E with a Humax Freesat for SWMBO.
Free Sat V8 meter. Sony Bravia 46" LCD, Sony BluRay and Home Cinema.
My Location
Normandy, France
Up till early March this year, I used a HD+ card in my vu+ solo clearing the card with Scam 3.59. I've purchased a new card but it refuses to clear. Is there an up to date version of Scam which will clear the new card?. (the new HD+ card says HD03 on the reverse)
 
sonnetpete said:
Up till early March this year, I used a HD+ card in my vu+ solo clearing the card with Scam 3.59. I've purchased a new card but it refuses to clear. Is there an up to date version of Scam which will clear the new card?. (the new HD+ card says HD03 on the reverse)
Click to expand...

Hi sonnetpete,

Not sure which image you are running but i have Scam 3.60 if thats any use not sure if it will update the card or not never really tried i just use it for my JSC Sports card.

Regards
 
Update,

Just had a quick scout round and it appears Oscam will update the card also so you should be ok with that.


Regards
 
Any tutorial how to instal scam 3.60 ? I have Vu+ solo box
Thank you
 
mariuss said:
Any tutorial how to instal scam 3.60 ? I have Vu+ solo box Thank you
Click to expand...

If you have the Cam as a .ipk installer then you simply send it over to the /tmp folder on the Vu+ and use the ipk installer via the image menu and reboot
 
Thanks for reply and to bonou2 for pm's !
 
I must be being blindingly thick....I've sent the Cam over and installed it via ipk then rebooted but Scam 3.59 is still showing in the softcam manager and not 3.6...do I have to delete the other version?
 
sonnetpete said:
I must be being blindingly thick....I've sent the Cam over and installed it via ipk then rebooted but Scam 3.59 is still showing in the softcam manager and not 3.6...do I have to delete the other version?
Click to expand...

You should have both versions there 3.59 and 3.60 if not then its probably wise as you say to uninstall both and just use 3.60
 
Thanks, Digi but where are the cams located on the VU+? I can find the .ipk files but not the cams? By the way, I've also been advised to change permissions to 755.
 
sonnetpete said:
Thanks, Digi but where are the cams located on the VU+? I can find the .ipk files but not the cams? By the way, I've also been advised to change permissions to 755.
Click to expand...

The actual main files are in /usr/bin folder although if you installed via an ipk then permissions are set via the initial install


Regards
 
Back
Top