eminem120176
Member
- My Satellite Setup
- Vu+duo, DM500, SS2, Sky+HD, 1.2m dish motorised
- My Location
- Nottingham
Please try to help me,
My motorised set up has been up for five years. however the pole had become loose on the flat roof it was on so I took it down and re-installed it a few weeks ago. All was okay. All sats scanned and picked up a good range of channels on my DM500, my Vu+ duo and my SS2. 45w - 45e. Last week during some high winds it came crashing down, concrete came loose. (only on to the flat roof -18 inches). I have installed it again and can not get any signal above 63% from 1w. No transponders found. I have installed the latest settings info also. The dish or LNB has no apparent damage from the fall.
I changed the STAB 120 motor for another upright 100 H-H motor I had and still no signal above 63%. Replaced the smart titanium quad LNB for a black ultra Inverto quad and can now only get the Poker channel on 1w. No other channels or transponders are picked up on any satellites. They are all there in the settings and stay at 63%. BTW I used a sat meter to get highest signal as I have always done
I am a bit stuck for ideas at the moment.
Pole - bang on 90deg
Dish/arms - could be slightly damaged - nothing visible however
LNB quad - Replaced - problem still there. skewed to 0deg
Cable dual feed from quad - Poker channel on at 86% on both feeds
Motor - took out of loop and still no signal but the poker channel, motor also set to elevation settings of 29.5deg initially and then changed to 37deg not sure about these but both picked up poker channel with some dish adjustment. done a full channel scan on both settings to no success.
Receiver. DM500 works off the sky dish and picks up astra2 with no issues
Trees - never had an issue - got all sats up to a few weeks back
BTW I am at 52.9n 1.1w
Any advice would be appreciated
Thanks
My motorised set up has been up for five years. however the pole had become loose on the flat roof it was on so I took it down and re-installed it a few weeks ago. All was okay. All sats scanned and picked up a good range of channels on my DM500, my Vu+ duo and my SS2. 45w - 45e. Last week during some high winds it came crashing down, concrete came loose. (only on to the flat roof -18 inches). I have installed it again and can not get any signal above 63% from 1w. No transponders found. I have installed the latest settings info also. The dish or LNB has no apparent damage from the fall.
I changed the STAB 120 motor for another upright 100 H-H motor I had and still no signal above 63%. Replaced the smart titanium quad LNB for a black ultra Inverto quad and can now only get the Poker channel on 1w. No other channels or transponders are picked up on any satellites. They are all there in the settings and stay at 63%. BTW I used a sat meter to get highest signal as I have always done
I am a bit stuck for ideas at the moment.
Pole - bang on 90deg
Dish/arms - could be slightly damaged - nothing visible however
LNB quad - Replaced - problem still there. skewed to 0deg
Cable dual feed from quad - Poker channel on at 86% on both feeds
Motor - took out of loop and still no signal but the poker channel, motor also set to elevation settings of 29.5deg initially and then changed to 37deg not sure about these but both picked up poker channel with some dish adjustment. done a full channel scan on both settings to no success.
Receiver. DM500 works off the sky dish and picks up astra2 with no issues
Trees - never had an issue - got all sats up to a few weeks back
BTW I am at 52.9n 1.1w
Any advice would be appreciated
Thanks