rato
International Administrator
- Joined
- Jul 11, 2005
- Messages
- 1,429
- Reaction score
- 0
- Points
- 38
- Age
- 54
- My Satellite Setup
-
DM800; Nokia 9800s; Nokia 9902S w/T-Rex 3.66
w/ Inverto IDLP-40TL +
Technisat 33 dish; Pace DS430N + Humax HDCI-2000 w/
Gibertini OP 1.25m dish w/Inverto 0.3dB. & Invacom 0.2dB. w/ Spaun SAR 411;
CAS 3;FUN7; SkyStar2; AltDVB;
- My Location
- Setubal, Portugal
I've been trying these last few days to connect my Infinity USB card reader to my DM800 but no luck. It lights up the blue light which means: "ready, but no card". I execute the dmesg in Telnet and it appears to have located it. These are the last lines after the dmesg command:
"usb 2-1: new full speed USB device using brcm-ohci-0 and address 3
brcm-ohci-0 brcm-ohci-0.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PP
S PES CCS
usb 2-1: default language 0x0409
usb 2-1: wrong descriptor type 32 for string 3 ("?")
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Infinity USB Unlimited
usb 2-1: Manufacturer: WB Electronics
usb 2-1: SerialNumber: ?
usb 2-1: hotplug
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: hotplug
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0002"
I've tried in the CCcam.cfg file by adding the command "SERIAL READER : /dev/usb/tts/0 smartreader+" but still nothing. The CCcam entitlements info panel says: "no or unknown card inserted"(but with a card in the reader).
Any help or ideas are welcomed.
Thanks
"usb 2-1: new full speed USB device using brcm-ohci-0 and address 3
brcm-ohci-0 brcm-ohci-0.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PP
S PES CCS
usb 2-1: default language 0x0409
usb 2-1: wrong descriptor type 32 for string 3 ("?")
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Infinity USB Unlimited
usb 2-1: Manufacturer: WB Electronics
usb 2-1: SerialNumber: ?
usb 2-1: hotplug
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: hotplug
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0002"
I've tried in the CCcam.cfg file by adding the command "SERIAL READER : /dev/usb/tts/0 smartreader+" but still nothing. The CCcam entitlements info panel says: "no or unknown card inserted"(but with a card in the reader).
Any help or ideas are welcomed.
Thanks