Help needed fixing 4.8e,7e,9e,13e,16e and 8w in one dish

S

shazgee4u

Member
My Satellite Setup
hotbird ,astra
My Location
orebro,sweden
hi i am in orebro sweden i have dm500s clone one i have 80cm oval trix dish and i want these satellites to hookup with it.
4.8e , 7e , 9e , 13e , 16e and 8w
this dish is focused at 4.8e how can i attach lnbs for other satellites or do i have to move my dish to fix all lnbs .

Regards
shaz
 
Even if you used thin LNBs like Alps, I think the spacings are going to make it difficult or impossible.

Why not just fit an H-H Motor and be done with it?
 
Yup for that amount of orbital slots either use multiple dishes or motorise.
 
Not a chance.

The satellites are too close together for an 80cm dish, and covering a range that is too wide.

You might fair OK with a Wavefrontier T90, not sure about the LNB spacing though still, If fixed is a must.

or 9E,13E,16E on your current dish maybe, plus another one for 7E,4.8E and 8W, using narrow LNBS.
 
Back
Top