help needed

[simon p]

can anyone tell me how to input keys (televes system) manually using T,rex cam / matrix r load please, or is it complete nightmare. thanks in advance, sye

 

[Mickha]

It's fairly straight forward, I'll describe the T-Rex Cam, as this is newer and can currently open more than the older Matrix.
Access the Cams menu, using your receivers remote control.
Go to Debug.
Choose the provider for the relevant keys.
Currently the 2 favourites are D+ and Cabo, both of which can be located in the same section, OhlAladin (Nagravision 2).
Click on OhlAladin and choose the provider you require, for this example I'll use D+.
So choose 4101 D+.
you will see 4 lines of keys:

00-0 xx xx xx xx xx xx xx xx
00-1 xx xx xx xx xx xx xx xx
01-0 xx xx xx xx xx xx xx xx
01-1 xx xx xx xx xx xx xx xx

both 00 lines are for key 00, and 01 lines for key 01, lets assume you need to update key 00.
Click on the first line 00-0 and enter the first 8 sets of the Decimal key.
These are 3 numbers, after each 3 sets your Cam will convert them back to Hexadecimal, 2 symbols consisting of either letters A-E and/or numbers 0-9.
Once you've completed the first 8 sets, click on 00-1 and enter the second set of 8 numbers.
That's it, just exit the menu and view the channels.