Help on LNB's

nitefire

Regular Member
Messages
93
Likes
1
My Satellite Setup
1M Dish TD110 Diseqc USALS Twin LNB Tecnomate TM-5302HD
Pair of T&K brackets
My Location
Grays,Essex
#1
Has any one tried the new syntec 0.2 LNB dose it really improve signal quaility
on all channels with a 1M dish.
I would like to read you views on this.
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,698
Likes
1,286
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#2
I don't think that it is any better than the Invacom or MTI Blue, both of these are a cheaper option. It also depends on what you are hoping to achieve and what you are replacing, if you are looking for spectacular performance improvements and receipt of previosly impossible channels, you may be disappointed.
 

nitefire

Regular Member
Messages
93
Likes
1
My Satellite Setup
1M Dish TD110 Diseqc USALS Twin LNB Tecnomate TM-5302HD
Pair of T&K brackets
My Location
Grays,Essex
#3
Thanks rolfw I can get Nilesat CH33 with a 1m at signal quaility of 20/30% I know you need 1.2m dish to be clear. I have a LNB called digital+.
Would low noise LNB help me?
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
25,177
Likes
5,614
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
#4
Anything with the legend <0.5 , check exactly what it means from the manufacturers site

It is at present impossible to get a through path of signal at Ku band with under 0.5 dB of thermal noise
 

nitefire

Regular Member
Messages
93
Likes
1
My Satellite Setup
1M Dish TD110 Diseqc USALS Twin LNB Tecnomate TM-5302HD
Pair of T&K brackets
My Location
Grays,Essex
#5
so the low noise be fine then.
 

nitefire

Regular Member
Messages
93
Likes
1
My Satellite Setup
1M Dish TD110 Diseqc USALS Twin LNB Tecnomate TM-5302HD
Pair of T&K brackets
My Location
Grays,Essex
#6
To make things clear I have got a 0.6dB would a 0.3dB be ok for Nilesat on 1m diish?
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,698
Likes
1,286
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#7
If you can receive Nilesat now but with a lot of breaking up, then you may reduce the breaking up, but unlikely to stop it altogether.

I think what CH is saying is that the noise figure may not be what it appears.
 

nitefire

Regular Member
Messages
93
Likes
1
My Satellite Setup
1M Dish TD110 Diseqc USALS Twin LNB Tecnomate TM-5302HD
Pair of T&K brackets
My Location
Grays,Essex
#8
Thank you rolw
 
Top