hemtglass
Member
- Joined
- May 2, 2017
- Messages
- 15
- Reaction score
- 4
- Points
- 3
- Age
- 79
- My Satellite Setup
- dreambox 800hd 1.2m dish
- My Location
- London e17 uk
Good day members
Yet another newbie in uncharted waters I am afraid.
My dreambox packed up a few months ago, switching off and on has not solved the problem which is – no signal where once there was, date now 1st January 2000.
What have I tried – I thought I had a cable/ LNB problem, disconnected and checked the cable with a friend’s meter, he suggested shorting one end of cable and checking other end to see short/ remove short and check again. Cable OK
Bought new Lnb from a company Technomate after marking position of old “case” with scribe, change back lnb after no change.
Make mention at this point, I think my box maybe not genuine after checking on this site even before I had problem
Differences from DM800 HD PVR to Cloneboxes – Gemini-Wiki
“My dream box”
On this Clone Box Mainboard is a label with DM800 REV: and the 14 pin connector is left of the sata connector.
All other including power supply images looks genuine imo,
So might be clone, what do I know.
I thought nothing to lose, so browsed around in menu and found a green screen as seen here.
As said I am green myself and wouldn’t know where to start, and some one here can guide. Can some member/s help please? Thanks in advance
Free view on terrestrial is dire
Yet another newbie in uncharted waters I am afraid.
My dreambox packed up a few months ago, switching off and on has not solved the problem which is – no signal where once there was, date now 1st January 2000.
What have I tried – I thought I had a cable/ LNB problem, disconnected and checked the cable with a friend’s meter, he suggested shorting one end of cable and checking other end to see short/ remove short and check again. Cable OK
Bought new Lnb from a company Technomate after marking position of old “case” with scribe, change back lnb after no change.
Make mention at this point, I think my box maybe not genuine after checking on this site even before I had problem
Differences from DM800 HD PVR to Cloneboxes – Gemini-Wiki
“My dream box”
On this Clone Box Mainboard is a label with DM800 REV: and the 14 pin connector is left of the sata connector.
All other including power supply images looks genuine imo,
So might be clone, what do I know.
I thought nothing to lose, so browsed around in menu and found a green screen as seen here.
As said I am green myself and wouldn’t know where to start, and some one here can guide. Can some member/s help please? Thanks in advance
Free view on terrestrial is dire