Help please - Identify LNB

A

arga

Member
My Satellite Setup
1.8m dish and freesat
My Location
Spain and UK
Hi I have a 1.8 dish in Spain, It has the three rods that hold a lnb in the centre. I need to replace
it but have no idea with what as the connection does not look like anything available.

Can anyone enlighten me as to which type I should get. Or is it a case of getting a new 3 rod LNB bracket holder and then any 40mm LNB to fit that. The system is about 7 years old.

many thnaks

Arga
 

Attachments

  • P291009_09.55.webp
    P291009_09.55.webp
    43.9 KB · Views: 32
It looks like a C120 LNB.

Unscrew it to confirm. Try not to strip the screw or bolt head!
WD40 can help, but it may come out easily without it.

A new one will cost around £15-20 in the UK.
 
As far as I am aware, the Invacom C120 LNB is the most highly regarded C120 LNB.

I recommend using self-amalgamating tape to totally seal the connection with the LNB.

Tape the cable to one of the 'rods' with PVC tape to prevent it from moving around and pulling out in the wind.
 
Arga, have resized your image, 700KB is too big and won't load automatically, have cut it dow to 100KB. If you haven't got a facility to resize images, download pixresizer, it's free.:)
 
Definately seen beter day. Would agree the Inacom is the one to go for. Most users say the twin or quad is better performing than the single (I have no experience of single), plus you get some spare outputs.
 
Back
Top