Help Please On New Diablo Cam

I

irishweeman

Member
My Satellite Setup
Phoenix apollo converted to openbox x820
100cm orbital dish
moteck 2100 motor
Diablo 2.3
My Location
N ireland
Hi

I have a phoenix apollo, 90cm dish and motor

Just bought a diablo cam 2.3 with underworld 1.19

The cam opens 16e digitalb and canal N on 1 west

However I can not seem to open premiere on 19 or Polsat or digitv. I have left on Premiere 1 and Polsat extra to try to open for over 45 mins each

I have turned off the internal patch on the phoenix in case they conflic

Any ideas?
 
Guys

THINK I HAVE SOLVED THE ISSUE!!!

Turned the patch back on!!!

Went to polsat extra and it cleared in 10 seconds
Premiere also clear

Is tps working open at the minute

Thanks
 
I think you mean Underworld 129, which is the latest file.
Go into your Cams menu and enter the Configuration folder.
Ensure Emulators and N2 AU are turned to ON, and Smartcard message set to normal, this helps to show the cam updating.
Once done tune into Premiere 1, if the smartcard message comes up saying that your keys are expired then it is working and if you leave it for 5 minutes the keys should Auto Update.
If you don't see the message try removing and re-inserting the cam.
If the message still doesn't appear change to another Premiere channel and try turning off and re-booting your receiver.
Please post back with the results.
I take too long typing !!!!
TPS is not open with the Diablo Cam but you can load a daily file to open a few french channels, none of the good English ones though.
 
All seems to be working now that i have turned my patch back on. I had read somewhere to turn the patch off, but i think that was the issue. The card looks fantastic with the channels open

If I want to keep watching digitalb and Canal do i just watch out for an underworld 130 to come out. I take it that will have any updated keys

My settings are
1 Language English
2 Caids File Caids
3 Auto PMT ON
4 Emulators ON
5 N2 AU ON
6 Em Priority 1 emu 2 cards
7 Fixed CW OFF
8 Smartcard Message Normal
9 Admin Menu
 
smartcard message - never

loaded the latest keys?
 
The latest keys.bin file will add a few extra channels, but not the main packages, as they are currently AU,
Underworld 130 should be released before the key changes and information will be posted on the forum.
Underworld 129 is also opening the Free X mature content channels if that's of any interest.
 
Hi
I have just got my Cas+ interface and Duoblo Cam.

I have downloaded everything as instructed but can someone tell me where to find Underworld 129 ?

Thank you
 
just got diablo in post,when inserted it reads DIABLO 1.60.--next it reads cam info--smatrcard info---configuration, when i press cam info it reads---cam serial number and underneath free storage memory...1750016 bytes.......when i press config. lan.english....smartcard mess. show normal....providers... when i press this i get add new providers and providers list i get three lines with numbers ........i am getting nothing on astra 19.please help me to find out how to set this cam,as i said i got it today and i assume i need to input file ,so what do i do.
 
You need to load the latst underworld file onto the cam, underworld 129, using your Cas programmer.
If you haven't already got your cas 3 working download the latest 8.5a Cas software from duolabs.
Install the software and then connect your Cas programmer using the USB lead.
Download underworld129 and place underworld129.dup on your desktop.
Insert the Diablo Cam into your Cas programmer and start up the CIS 8.5a software.
Click on the Cam Module tab, and then click on the 2 Diablo Cam icons.
Click on the little icon, with three dots, at the end ofthe File Name address bar, navigate to underworld129.dup and open.
The green light should now show on the Start Update icon, click this icon and wait for the cam to load.
Once complete insert it in your receiver, enter the menu and adjust the configuration options.
 
Guys thanks for all the help Just waiting for underworld 130 to do my first cas update !!!

Great piece of kit
 
michka,i have downloaded under 1.9 and i thnk i formatted file properly,but i cannot open prem. on astra 19,my cam is 2.3.please helpme
 
You need to turn emulators and N2 AU ON in the configuration settings.
Enter the Cams menu using your receivers remote control, enter underworld 129 and enter the configration folder.
Change Emulators to ON, N2 AU to ON and Emulators Priority to 1 Emu 2 Cards.
Once complete exit the menu and tune in to Premiere 1, you should get the smart card message that the keys are expired, leave it for a few minutes and the keys will update.
 
Back
Top