Help with my MR cam!

A

amerwaqar

Member
My Satellite Setup
13e
19.2
My Location
west yorkshire
Hi,

i need some help and advise on programming my Matix rev cam i have MRB 3.00 software.

i most recently lost all TPS channels:( but i find that others are working fine e.g BBC Prime, Eurosport 1+2

i firstly would ask to why this has happened with only the TPS channels and to why that other still remain open.:confused:

secondly can someone help me to re-programme my cam and explain the process,

thanks.
 
amerwaqar said:
Hi,

i need some help and advise on programming my Matix rev cam i have MRB 3.00 software.

i most recently lost all TPS channels:( but i find that others are working fine e.g BBC Prime, Eurosport 1+2

i firstly would ask to why this has happened with only the TPS channels and to why that other still remain open.:confused:

secondly can someone help me to re-programme my cam and explain the process,

thanks.
Click to expand...

The TPS keys change daily I use a Matrix Reloaded and flash the CAM up with new .upd files (with new keys) I use my laptop (you can get a CAS interface which is better as can do more things with it).

Files are posted on the `net other forums
 
Cheers, BIG Ken

but is there away that i can do this through remote control with a fun card, its just that i read it some where in one of the forms.

thanks.
 
If you have an active cas menu on screen then you can imput your new keys with your remote, that is how us tm users do it. Or you can repatch bit of a nuisance if like me your pc is a room away from your box..:D
 
amerwaqar said:
How would i enter letters via remote, my remote as numbers 1-9???
Click to expand...

Hexadecimal, in two figures, is entered using decimal notation as three numbers.
 
For you information, it is not possible to add aes keys with remote control on matrix cams firmware.

You have to program you cam with "cas interface" or other tools.

Few days ago, aes keys were only for Multivisions but now they affect TPS too!

So, mrb300 is out for TPS & Multivisions and there is no way to add aes keys on it!

Regards
 
Hi,

if i was to enter the right KEYS, where would i insert them

cas set up, select cam (M Rev / M reb)

options

1.Edit cas key

select viaccess 1

options!

select ID Provider (007C00)

options!
1.0x08 ~ 0x0b, selected

options

0x08???
0x09???
0x0a???
0x0b???
 
Back
Top