longstockings
Satellite Whore
- Joined
- Jun 28, 2004
- Messages
- 148
- Reaction score
- 3
- Points
- 0
- Age
- 44
- Website
- www.tm9100.co.uk
- My Satellite Setup
-
Technomate 1500 CI+
80cm Polycarbnate Dish
0.3db Universal LNB
Moteck Digipower Motor
- My Location
- Totnes, Devon 50.4320N, 3.6690W
I'm running Gemini 2.10 with Newcamd 6.1 inc cardspider.
I have all the usual stuff opening just fine and on reading the tutorial in the idiots guide thought that I should get SKY working with Newcamd but it doesn't want to work.
I ftp'd into the Dreambox and copied the correct dreambox version of cardserver and chmod 755
I then edited the cardserve.cfg file to input the settings from the tutorial putting my pace boxes serial number in the correct place as seen in the boxes system menu.
I used ultraedit just to be sure the file would be readable
I then reset the dreambox and can't decode anything on SKY
Can anyone offer any further help or pm me your working files so I just need to change the box key.
I don't know where I have gone wrong
I have all the usual stuff opening just fine and on reading the tutorial in the idiots guide thought that I should get SKY working with Newcamd but it doesn't want to work.
I ftp'd into the Dreambox and copied the correct dreambox version of cardserver and chmod 755
I then edited the cardserve.cfg file to input the settings from the tutorial putting my pace boxes serial number in the correct place as seen in the boxes system menu.
I used ultraedit just to be sure the file would be readable
I then reset the dreambox and can't decode anything on SKY
Can anyone offer any further help or pm me your working files so I just need to change the box key.
I don't know where I have gone wrong