How configurate C Band in Dreamdox

F

fif

Member
My Satellite Setup
Dreambox 5620,
Dreambox 600,
Openbox 810,
36v Actuator, Vbox-II
T90 8°W<>28°E,
Dish 180cm for C Band
Panorama LNBF+Waveguide
My Location
Germany/Holland
Hi Folks

I am really jealous when i see all your equipments receiving C-band. I got everything ready but I don´t know how to bring up my DB about C band frequences. I mean This:

LOF/L?
LOF/H?
Schwellwert?

Do I need special Frequencies für C-band?

Thanks
 
Hi Folks

I am really jealous when i see all your equipments receiving C-band. I got everything ready but I don´t know how to bring up my DB about C band frequences. I mean This:

LOF/L?
LOF/H?
Schwellwert?

Do I need special Frequencies für C-band?

Thanks
 
fif said:
Do I need special Frequencies für C-band?
Click to expand...

Well you need a special C band lnb to start with and at least a 1.2mtr dish I believe then you need to select the frequency and polarisation based upon this kind of information

_http://www.lyngsat.com/pak1.html
 
fif said:
Do I need special Frequencies für C-band?
Click to expand...

Well you need a special C band lnb to start with and at least a 1.2mtr dish I believe then you need to select the frequency and polarisation based upon this kind of information

_http://www.lyngsat.com/pak1.html
 
Just to add to what Topper has posted..
...You will also need to set local oscillator fequency in your receivers setup menu to 5150 unless its specified as 'C band' instead..

With a H/V switching LNB ..
No LO or Hi or Switch point is used ...just 5150
rgds
VS
 
Just to add to what Topper has posted..
...You will also need to set local oscillator fequency in your receivers setup menu to 5150 unless its specified as 'C band' instead..

With a H/V switching LNB ..
No LO or Hi or Switch point is used ...just 5150
rgds
VS
 
Back
Top