Just Sharing This How to bring your tm5402hd back to life

william-1

william-1

Super Moderator
Staff member
Messages
9,713
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra 0.2
Superior Dark Motor (160° max)
(50 east to 34.5 west)
TM6902HD (A/B switch) Octagon SX88+Optima

Raven 88cm Mesh Dish + TM-1 0.1
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ (A/B switch) Edision S2

45cm dish V8 Golden 28E FreeSat Quad Lnb
Virgin Media FreeSat
My Location
Epping Forest Essex
Dead TM5402HD receiver this may bring it back to life:-
Turn the TM 5402 'Off' using the power switch on the rear of the receiver... then press and hold down the 'Menu' button on the front of the receiver as you switch the TM 5402 back 'On' using the power switch on the rear of the receiver... you will then see the 'Loader Menu' on screen... try the 'Factory Reset' option on the list and see what happens... also try the 'USB Download' option...

Switch the TM 5402 HD OFF using the power switch on the rear of the receiver... insert the USB Flash Drive into the receiver as normal... then press and hold down the POWER BUTTON on the front of the receiver as you switch the TM 5402 HD back ON using the power switch on the rear of the receiver... continue to press and hold down the POWER BUTTON until you see the BOOT LOADER MENU on the TV screen... then release the POWER BUTTON... you will see two options for loading firmware/files... however the BOOT LOADER program usually scans the USB Flash Drive and downloads the latest/most recent firmware automatically...
Make sure you have only Technomate Firmware on the USB stick for your receiver.
 
Top