B2K420
Member
- Joined
- Jan 10, 2012
- Messages
- 11
- Reaction score
- 0
- Points
- 0
- Age
- 41
- My Satellite Setup
- Triax1.1m multi-lnb motorized dish, EMP Centauri 8x1 DiSEqC, DM8000 HD Genuine, 2 x DM800S-HD Clone - DreamboxUK V1.1 & Nabilosat BH V0.12
- My Location
- LV-426
Hello all,
My DiSEqC switch (8 Way DiseqC Emp- Centauri) has stopped switching between satellites. Only LNB1 (28.2e) is working. (I can't get any channels on LNB2 =19.2e, LNB3 = 13.0e, LNB4 = 9.0e & LNB5 = 4.8e).
I have DM800-S HD Clone. I just flashed a new image on my box and since then the Switch has stopped working.
Any help will be appreciated.
Regards
P.S.
Sat = 28.2
LNB = LNB1
DiSEqC Mode = 1.1
Committed DiSEqC command = Input1
Command Order = Committed,toneburst
[h=1]
[/h]
My DiSEqC switch (8 Way DiseqC Emp- Centauri) has stopped switching between satellites. Only LNB1 (28.2e) is working. (I can't get any channels on LNB2 =19.2e, LNB3 = 13.0e, LNB4 = 9.0e & LNB5 = 4.8e).
I have DM800-S HD Clone. I just flashed a new image on my box and since then the Switch has stopped working.
Any help will be appreciated.
Regards
P.S.
Sat = 28.2
LNB = LNB1
DiSEqC Mode = 1.1
Committed DiSEqC command = Input1
Command Order = Committed,toneburst
[h=1]
[/h]