Humax 5400 AllCAM patch

2old4this

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#1
For several months a group of Dutch satellite hobbyists ("Humax 2000 team") had been developing a patch for the Humax IRCI-5400 receivers, which would convert the Irdeto embedded CAM into an AllCAM capable of decoding the German Premiere-World Betacrypt channels (including BBC-Prime, by the way).

This was ready a few weeks ago but the developers decided they wanted to sell it (ostensibly to recover their costs). A few Dutch and German satellite dealers have since been selling the upgrade (applied by them) for about Euro 75.

Other hobbyists in the Netherlands have now extracted the patch from an updated receiver and made it available for free download.

Here are various different firmware versions with the patch already applied:

Via Atilla (Black Tiger):
for ID 0016.0000 http://cyber.nl.fortunecity.com/floppy/28/download/other/hic-00p.zip
for ID 0016.0200 http://cyber.nl.fortunecity.com/floppy/28/download/other/hic-02p.zip
for ID 0016.0400 http://cyber.nl.fortunecity.com/floppy/28/download/other/hic-04p.zip
for ID 0016.0600 http://cyber.nl.fortunecity.com/floppy/28/download/other/hic-06p.zip

Via Franx:
for ID 0016.0000 www.xs4all.nl/~no1/HIC-00patch.zip
for ID 0016.0200 www.xs4all.nl/~no1/HIC-02patch.zip
for ID 0016.0400 www.xs4all.nl/~no1/HIC-04patch.zip
for ID 0016.0600 www.xs4all.nl/~no1/HIC-06patch.zip

Via Satnerds:
for ID 0016.0000 http://www.satnerds.com/software/hic-00p.zip
for ID 0016.0200 http://www.satnerds.com/software/hic-02p.zip
for ID 0016.0400 http://www.satnerds.com/software/hic-04p.zip
for ID 0016.0600 http://www.satnerds.com/software/hic-06p.zip

Please note that the patch only works with original German & Austrian "C-card" MOSCs, or with Voyager in "Betacrypt" mode.
If you want to use it with a wafer, then it must be an Amtel (funcard) type and you will need to load a special version of the wafer firmware too.
Here's a link to that:
http://triballs.com/sat4all/irdeto/software/1-4-all.zip

Standard Humax information (English) on how to load the firmware:
http://cyber.nl.fortunecity.com/floppy/28/download/other/leesme1st.doc

You may/will also encounter checksum errors in the hdf file.
If so. use this special fixer (run for instructions)
via Atilla (BlackTiger)
http://cyber.nl.fortunecity.com/floppy/28/download/other/hfcf.zip
via Satnerds
http://www.satnerds.com/software/hfcf.zip

Humbox (Humax settings editor/loader) - special version for patched 5400 - via:
http://www.all-cam.n3.net/
http://triballs.com/sat4all/misc/misc.htm
Direct link: http://triballs.com/sat4all/humax2000/humbox_v3.0se.exe

More info/links:
http://pub10.ezboard.com/fthesatellitefunboardnieuwseninformatie.showMessage?topicID=357.topic

Reactions from the original developers (TeeBee+Humax2000 group):
http://www.sat4all.com/board/Forum31/HTML/000140.html
http://www.sat4all.com/board/Forum16/HTML/000384.html

Info (Dutch only) on restrictions/caveats on using the patch
http://www.sat4all.com/board/Forum16/HTML/000381.html


Enjoy!
2old
 
S

stock

Guest
#2
I'm looking to buy the humax 5400 and add the Allcam patch myself. What do i need to do this ? How do i connect the receiver to my PC? how do i load the patch software to the receiver ? do i need software to do this? has anyone tried this ? if so what results ? which allcam patch software should i download ? any links please ?

thanks
stock
 
2old4this

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#3
that's a lot of questions.
The patched software can be loaded in the same way as the normal software. Details (cable, loader utility) available at Humax's web site.

Other recent links here included links I recall to sites with more info. Try our search function.

2old
 
S

stock

Guest
#4
thanks for all your help my humax 5400 is now working with the 2.4 allcam patch. found this how to link-

http://x-stream.fortunecity.com/laras/21/how-to-upgrade.html

thanks
stock.
 
S

shahfans

Member
Messages
5
Likes
0
#5
Hay there
I have two recivers , Fortecstar 5100 and otehr supermax 6000 plus
I need latest firmware for these two
if any have then plz send me on my email ==> shahfans@hotmail.com
 
Top