Humax HDR HDMI problem

[npc]

Hi guys I wonder if someone has an answer to my problem, I just turned the tv on and my freesat hdr box is showing a green screen.I changed the HDMI cable still the same, then I put a scart cable from the freesat to my tv and turned to the av channel of the scart cable and the picture came on. I think there's a problem with my HDMI socket on the back, can anybody give me any ideas.

 

[PaulR]

Firstly, did it work over the HDMI before? Is it showing a green screen on all channels or just the BBC HD channel? What TV are you feeding? What HD signal will it accept - 720p and/or 1080i? Have you changed the TV input to the correct HDMI socket?

 

[Channel Hopper]

As it is a Humax, it most likely needs powering down from the mains.

 

[PaulR]

Good point - the simplest test first!

 

[npc]

Yes it did work before on HDMI, and it is the same on all channels, I have checked it on two TV's (Sony 37"/Pioneer 42") still the same. I have checked all what both of you have said. I have done a factory reset and a power down, it's still the same. I'm going to turn it off till tomorrow and check it then, Thanks both of you for your suggestions, I'll keep you informed thanks again

 

[npc]

Just to keep you all updated, I booted the box up this morning and it is working, Thanks for all your coments.

 

[Channel Hopper]

Good to hear it is now working as per specification.

(and I forgot to suggest swapping over the HDMI cable ends, just in case it was a poor connection issue at one end only).

 

[npc]

I did, I swapped the cable with another one, thanks m8