I don't know how Matrix Reloaded Cam works?

abder

Member
Joined
Aug 11, 2004
Messages
28
Reaction score
0
Points
0
Age
54
Dear all,

I am really new to Satellite Receivers. I just bought Televes RSD 7254 Digital Receiver, now I ordered Matrix Reloaded Cam Version 1.81, and a couple of Funcard 6.

Here are my questions:

1. Is the Matrix Reloaded Cam Version 1.81 enough on its own, or does it need to be reprogrammed?
2. If it does need reprogramming, will the two Funcard 6 do the job?
3. Will I need a programmer to programm the two Funcard 6?
4. Is it possible to update Matrix Reloaded Cam 1.81 to 1.10? How do I do that using a PC, I probably need some kind of Interface.
5. Does updating Funcard mean the same as updating Matrix Reloaded Cam.

I am really sorry for all these stupid questions, but as I said, I am new to this area, and I do appreciate anyone who could take a bit of their time to try and answer some of these questions.

Cheers.
 

gauros

Regular Member
Joined
Jul 22, 2004
Messages
101
Reaction score
0
Points
0
Age
37
1)what channels do you want to waTHC FIRSTLY.
2)yes if it need reprogramming the two fun cards will be fine.
3)yes you need a programmer
4) to update the cam using your PC you need a cass1/2 interface, it is easier to update using fun cards.
5)noone says updating funcard but they say updating MR using funcards.


gauros
 

abder

Member
Joined
Aug 11, 2004
Messages
28
Reaction score
0
Points
0
Age
54
Thank you gauros, that was very helpful and still is!

As I understand it now; to update Matrix Reloaded Cam, I need CAS 1 or CAS 2 and FUNCARDs, is that right?
Also, I found something called FunCard Programmer, I am sure you know what it is; it is an Interface Card with a parallel port, will that work like CAS, or this later is better?

Again thank you for your very quick reply.
 

gauros

Regular Member
Joined
Jul 22, 2004
Messages
101
Reaction score
0
Points
0
Age
37
abder said:
Thank you gauros, that was very helpful and still is!

As I understand it now; to update Matrix Reloaded Cam, I need CAS 1 or CAS 2 and FUNCARDs, is that right?
Also, I found something called FunCard Programmer, I am sure you know what it is; it is an Interface Card with a parallel port, will that work like CAS, or this later is better?

Again thank you for your very quick reply.
hello mate, you need either funcard 5 or 6 or cass1/2.
i am using the same programmer Infinity funprogrammer usb and i think that these two are the same.
you cannot use a fun programmer as a cass.
if you buy fun card then it would be easier for you to update the MR.

gauros
 

abder

Member
Joined
Aug 11, 2004
Messages
28
Reaction score
0
Points
0
Age
54
Again me, sorry!

The FUNCARDs I am buying are Blank FUNCARD 6, so I do need to reprogram them, is that right?
If so, what would you suggest to reprogram them?

Cheers.
 

gauros

Regular Member
Joined
Jul 22, 2004
Messages
101
Reaction score
0
Points
0
Age
37
i will tell you something.
when you buy the fun6 then you need to buy a programmer to program them.
if you do not know how to do that then go visit www.paytv.ws and i will explane to you then step by step how to do it.

gauros
 
Top