idreto cam and betacrypt

M

mark0804

Guest
#1
hi all

i am told that my cam will need to be upgraded to accept premier on betacrypt, i would be most gratefull if anyone could help me ..i have been using viaccess for a while now, and new to the idreto system..and whats premier like?..what am i missing?

many thanks to you all

mark
 
O

Old Satellite

Specialist Contributor
Messages
458
Likes
0
#2
What are the details from your Iderto cam ?

Some can not be easily reflashed without some hard and difficult work,

there are many threads on the site that supplies a lot of information on what can be and what can not be easily re-flashed.


If you check the number on your cam and then post then we can help further.

Old Satellite
 
M

mark0804

Guest
#3
hi

thanks for replying...the info on my cam is:

idreto common interface ver: 01.06 softcell: ver 2.09 cl
- demux {sw ca}. compiled oct 12 2000

many thanks

mark
 
O

Old Satellite

Specialist Contributor
Messages
458
Likes
0
#4
Sorry for the news,

This cam is one of the more difficult since you need to open the cam then,remove an AMD EEPROM series device by unsoldering with desoldering equipment. This is a LQFP (low Flat Quad Package)device. and you need to be very carefull!

You they need to program the EEPROM AMD device off the board.
with suitable equipment.

This not practical at home unless you know some one with the equipment and time, there are some specialist users on the net that can help if you wish to continue?

regards

Old Satellite
 
M

mark0804

Guest
#5
many thanks old sat, i think i will leave that one for a while..many thanks for replying..cheers
 
Top