C
Coca-Cooper
Guest
A weird one!
Amstrad DRX400 Digibox connected to my TV via the SCART Cable - No Problems!
A second decoder (Strong 4100 - for BBC Prime) connected to the Digibox through the VCR SCART socket on the Digibox. So far, no problems, I just turn on the BBC Prime decoder and I can watch (and hear) everything on my TV.
BUT:
If I connect a coax cable to either RF-1 Out or RF-2 Out so that I can watch the channel on a second TV this is what happens:
- Turning on the Strong Decoder, I see the picture for BBC Prime on the second TV, but the audio is whatever is playing on SKY. On my main (SCART) TV I see BBC Prime Picture AND audio
- Turning off the Strong Decoder, SKY channels play fine (correct picture and audio)
It seems like the RF curcuit recognises a change in signal source only for the video, but not the audio.
I've used the {Service,4,0,1} menu to change the RF channel, but no luck.
Any ideas?
Amstrad DRX400 Digibox connected to my TV via the SCART Cable - No Problems!
A second decoder (Strong 4100 - for BBC Prime) connected to the Digibox through the VCR SCART socket on the Digibox. So far, no problems, I just turn on the BBC Prime decoder and I can watch (and hear) everything on my TV.
BUT:
If I connect a coax cable to either RF-1 Out or RF-2 Out so that I can watch the channel on a second TV this is what happens:
- Turning on the Strong Decoder, I see the picture for BBC Prime on the second TV, but the audio is whatever is playing on SKY. On my main (SCART) TV I see BBC Prime Picture AND audio
- Turning off the Strong Decoder, SKY channels play fine (correct picture and audio)
It seems like the RF curcuit recognises a change in signal source only for the video, but not the audio.
I've used the {Service,4,0,1} menu to change the RF channel, but no luck.
Any ideas?