Infinity USB, which file where?

T

tonypowell

Regular Member
Messages
13
Likes
0
My Location
France
#1
I have downloaded the file predator 231. I have a Fun 7 Dragon Loader card

I know that I have to write "FUN7LDR.HEX" into Flash.

However which file has to be written into "Int EEProm" ( Is it predator231.bin or predator231.dra?) or do I leave it empty?

Similarly for "Ext EEProm" ( Is it predator231.bin or predator231.dra?) or do I leave it empty?

The infinity software seems to read the card as a funcard 2 - is that correct or should I change it? Should I have it 'autodetect" the card?

Hope somebody can help
 

Attachments

R

rob43

Regular Member
Messages
291
Likes
0
My Location
canaries
#2
hi, i have the usb/pheonix one so i´m not sure about just using the usb only. i used the ext eep only which is the dra. but i´ve pasted the how to from the 231 file below.



ALTERNATIVE METHOD
For this method, you need a FUN7 card
Using a suitable program, program the FLASH of the FUN7 card with FUN7LDR.HEX,
and program the EEPROM with predator2XX.bin. Make sure the program you use
handle the large eeprom size of the fun7 card correctly!
END alternative method
 
T

tonypowell

Regular Member
Messages
13
Likes
0
My Location
France
#3
Thanks, I have now worked it out:
1: I need to have it set up as a Fun 7 card, which gives me 4 places to populate.
2: Put the flash file in Flash
3: Split the predatorxxx.dra file into tw parts using a hex editor which will give me predatorxxxeeprom1.bin and predatorxxxeeprom2.bin, or
4:Find a site with them already split such as:
http://www.ucassupport.nl/dragonsupport/english/Software.htm

5: leave the internal eeprom alone, but populate the external 1 and 2 with the eproms

6: Et Voila, Robert is your Father's Uncle.
 
R

rob43

Regular Member
Messages
291
Likes
0
My Location
canaries
#4
thats good news, glad you got it working. btw pred 232 is now out, tps & mv working
 
Top