Inside surface of Feedhorn - Shiny or dull?

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Dear Feedhorn experts,

I am living in Hungary and have recently acquired a large sat dish, the original LNB was an SMW. I am now in the process of changing the LNB to the invacom, and I will use the original Feedhorn from the SMW.
Problem is, it seems to have oxidised, therefore I would like to ask if it makes any sense to polish it up? will it make any difference?
Many thanks in advance for your help and advice.
Thomas.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Hi Thomas, welcome to the forum.

You mean the inside or the diaphragm on the face?

If it's just the outside metal surface, it shouldn't affect the perfomance if you remove any oxidisation.

Llew
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Sorry, I was distracted and didn't read your post header.

If the oxidised surface can be removable without any apparent disfigurement to the inside surface, it should be OK.

Regarding fitting an Invacom LNB to the feedhorn, the fixing holes won't align perfectly. You will probably only be able to use a couple of the screws, but as long as the O ring is giving a good seal it will be fine (that combination is what I have used for some time now).
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Thank you Llew.

I have attached a pic of the inside of the feedhorn. The cover was shattered, I suppose for a while now - it just crumbled away in my hand. Beneath the external cover the metal rings are looking very matt, and probably oxidized. I wondered if this would affect the signal before reaching the LNB? Should I polish it?
Many thanks for your reply,
T.
 

Attachments

  • 09-09-09_1541.jpg
    09-09-09_1541.jpg
    41.2 KB · Views: 162

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Yes I can see you might have a problem with the cover having perished. It's difficult to tell without inspecting at first hand. SMW feedhorns are made of diecast aluminium, so a polish suitable for aluminium should remove the oxidisation.

Are you sure that it is an SMW feedhorn? They usually have four holes for fixing to an SMW LNB.

Llew
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Llew,
I cannot say for sure that the feedhorn is an original SMW. The feedhorn was attached to the LNB. I will post some photos later this morning of the dish, and the LNB. Maybe the feedhorn was fitted onto the LNB when that was replaced, but that I don't know.
back later........
Thanks,
Thomas.
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
here are the pics.
 

Attachments

  • paraize 010.jpg
    paraize 010.jpg
    42.5 KB · Views: 191
  • paraize 013.jpg
    paraize 013.jpg
    28.5 KB · Views: 183
  • paraize 007.jpg
    paraize 007.jpg
    27.7 KB · Views: 195
  • paraize 001.jpg
    paraize 001.jpg
    28.4 KB · Views: 197
  • paraize 002.jpg
    paraize 002.jpg
    26.4 KB · Views: 198
  • paraize 003.jpg
    paraize 003.jpg
    45.6 KB · Views: 191

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,536
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Picture 3 looks suspiciously like the back end of an Irte magnetic polariser, which should be discarded immediately.

As for corrosion on the feed, it's never bothered my system unless the oxidising retains moisture behind any cap you might fit. Polishing the dull bits is unlikely to improve your signal with the exception of the bore, where blistering can give losses at the odd frequency, but this is minimal.

An offset dish (when installed vertically/non-inverted mode), needs a completely waterproof cap, otherwise water will ingress down the feed to the sensitive parts.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
That'll be the SMW ferotor if Pic 3 is of the one fixed on the LNB in Pic 1. As CH says, you won't need that if you are using an Invacom universal LNB.
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Thank you very much Llew for your help. I was going to throw out the SMW stuff that was attached to the feedhorn anyway, I think it is obsolete by now. I attached the pics, because it maybe that the feedhorn is not an original SMW one.
Any ideas about the dish? It is cast plastic, and oval in shape. Do you think that if I used the signal strength meter on my "strong" sat receiver, I can find the optimum focal point for the horn/ angle and azimuth of the dish?
Many thanks,
T.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Looks like an Andrews dish to me. 1.8M?

If you're using the original feedhorn and just swapping the LNBs it will already be correct for focus.

Don't bin the SMW stuff, you should get a good price on those on fleabay.
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Thanks. 1.8m wide and 2m high - in fact oval.
you're welcome to the SMW stuff if you pay the postage....
T.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Thanks for the offer Thomas, I can't use them now as my installation is not set up for that LNB/polariser now. Hold on to them though, maybe somebody here might be interested in them.

Llew
 

Turok

Regular Member
Joined
Apr 25, 2005
Messages
2,237
Reaction score
2
Points
38
Age
36
My Satellite Setup
1,25 Fibostop
Jäger Smr 1224 & Smo 36 Dual Axsis Motor
Dynasat F1
Monterey 140
Drembox 800
sky Pace HD Box
Tagra 2,20 M Fullsize Dish
Echostar 2,40m Mesh for cband!
My Location
Austria
Hello!
i often recogneized,that the are many problems,to fix flange lnbs,for diffrent brands!
when you see,it does not hold good,you realy need a good weather protection!
alternativly you can try to make some more holes,to fix the flange lnb better,with more screws!

invacom offers a big plastic protection cape,that you can slide for there lnbs,iam not sure,is this conver separatly avalibe or not,i bought invacom circular linear quad lnb,in usa,and here,the rainpotection was included ,in europe i never see any!

with smw you have the better freqency stablity,then with the incacom,inverto also very good,i remove now all my incacoms from my dishes,because,when i look on the signal meter,the signal curve on my normal quad incacom,looks not very solid!
inverto lnbs,has like a plastic protection,that cover over the lnb,on my kathrein cas 180 ,this lnb was not working long,because also of the reason why some screws are not posible to install,then it works one month,after that it shows no signal,after that,i look on the lnb,that was installed with the protection ring,and see,that inside was accure,from outside i see no damage,was no problem to replace inside the warrenty!
also good to know is,that you have on the old gray incacoms only 2 year warrenty,and on the white newer ones,you have 5 years warrteny,the hotline told me!
on inverto you have always 5 years!
smw,i got confirmed from sweden,has stopped there lnb production on dec 31 -08
best thing you keep your lnb,and dont sell it,its very hard to find again,i have also to xline ftype here in reverse,when some emergency would happen!
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,536
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Llew said:
Looks like an Andrews dish to me. 1.8M?

From memory it looks more like a Prodelin with those additional reinforcements on the edges, the double strut along the horizontal central line is a giveaway to a derivative of the 1194 series.

But the ribbing near the centre is far more concentrated than I recall from my time working with them.
 

Turok

Regular Member
Joined
Apr 25, 2005
Messages
2,237
Reaction score
2
Points
38
Age
36
My Satellite Setup
1,25 Fibostop
Jäger Smr 1224 & Smo 36 Dual Axsis Motor
Dynasat F1
Monterey 140
Drembox 800
sky Pace HD Box
Tagra 2,20 M Fullsize Dish
Echostar 2,40m Mesh for cband!
My Location
Austria
Hi!
front and backside pictures of Prodelin 1,80 m dish,you will find currencly under this item nr


120467950550
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,536
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Turok said:
Hi!
front and backside pictures of Prodelin 1,80 m dish,you will find currencly under this item nr


120467950550


I don't recognise that number .

A link to the manufacturer's site with a (poor)picture of the back panel

_http://www.gdsatcom.com/Antennas/Data_Sheets/5002-352.pdf
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Hello,
Well I connected the feedhorn to the LNB and fiited it to the mounts. One strange thing is that the feedhorn shaft is 27mm, but the holder is only 20mm diameter (see photos). This is probably why the signal strength is not as good as I would have like to get it. I suppose the real answer is to find out what make the dish is, in order to find out the type of original feedhorn, and also to get the focal lenght correct.
I did do the calculation, but for offset where is the point on the dish that you need to measure from??
Thanks,
Thomas.
 

Attachments

  • LNB 013.jpg
    LNB 013.jpg
    110.5 KB · Views: 122
  • LNB 012.jpg
    LNB 012.jpg
    125.9 KB · Views: 138
  • LNB 011.jpg
    LNB 011.jpg
    57.8 KB · Views: 146
  • LNB 004.jpg
    LNB 004.jpg
    46.3 KB · Views: 144
  • LNB 001.jpg
    LNB 001.jpg
    44.1 KB · Views: 161

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,536
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
The feed clamping system does not look like a Prodelin, but they did have feeds that went outside the 20/40mm clamping arrangement.
 

tmbp

Member
Joined
Aug 31, 2009
Messages
13
Reaction score
2
Points
1
Age
61
My Satellite Setup
Sky digibox / Wndows XP pro
My Location
Hungary
Thanks for the info.
I was trying to find out exactly which dish I have. At prodelin, they say I have a 1183/1186 series, but the geometry drawing and the fixing arrangement for the feedholder are different. My ffedholders are screwed to the sides, unlike the 1183/1186 where they are fixed through the front. I looked at all the geometry drawings and found the nearest to my dish, which were the 2194/3180 series.
Please would someone kindly tell me what is the difference between these three dishes, as although they seem to be same, somehow they differ. If, assuming mine is of 2194/3180 series - will it be suitable for TV reception??
attached geometry pics of: 1183/1186 / 2194/3180
and photo of the rear of my dish, and the front with the LNB holder rods.
The reason I need to be sure which dish I have, is to have a correct setting of the focal point of the LNB - which I am assuming is presently incorrect.
Thanks for any help on this subject,

Thomas.
 

Attachments

  • 1183 back.pdf
    53.1 KB · Views: 96
  • 3180 back.pdf
    79 KB · Views: 68
  • Rear_Dish.jpg
    Rear_Dish.jpg
    45.6 KB · Views: 71
  • Front_Dish.jpg
    Front_Dish.jpg
    110.5 KB · Views: 85
Top