Installer in belfast

Chris76

Chris76

Regular Member
My Satellite Setup
Vu+ duo with a 300gb hdd also dm500 and tecnomate 5200 with a 1m and 1.1m motorized dishes and minidish fixed to 28.2
My Location
Belfast
Static dishes,motorized systems,Diseqc multi switch and cat5-6 installs (if required)

Will also work work in the surrounding area's.

pm me for more details.
 
Hi Chris. I need an installer to set up a DM800 and 2600 motor in Bangor if you are available. Could you please PM me your phone number. Thanks, Adam.
 
adamshaw1977 said:
Hi Chris. I need an installer to set up a DM800 and 2600 motor in Bangor if you are available. Could you please PM me your phone number. Thanks, Adam.
Click to expand...

Could a mod please switch on pm on for adam please.

Chris
 
PM enabled for adamshaw1977 to make contact.
 
PM sent Adam

Chris
 
Morning Chris, Im after a full install on a new build in the Portadown area if your interesting in pricing it?

Could a kind administrator temp enable my PM for futher details please?
 
rcollen said:
Morning Chris, Im after a full install on a new build in the Portadown area if your interesting in pricing it?

Could a kind administrator temp enable my PM for futher details please?
Click to expand...

When the member indicates his willingness to do the job by replying to your post we will
 
Hi topper

Could you enable pm for r collen please for contact

Sorry for the delay mate i have been very busy
 
OK, PM enabled.
 
Thanks as always Rolfw


Chris
 
Hi Chris,

I currently have a fixed sky dish (pole mounted at back of house) running to a single room (downstairs living room).

I have just bought a new spiderbox SD5000 receiver. If possible, I am looking for following setup using my existing sky dish (if it is suitable):

- LNBs added to pick up 13e Hotbird, 19e Astra 1 as well as 28e Astra.
- DISEqC switch(es) to auto control LNB (receiver supports all DISEqC protocols, i.e. 1.0, 1.1 and 1.2)
- New additional second line to upstairs back bedroom (is right below where dish is installed). This line will connect to new spiderbox receiver.
Ideally though the new setup will allow either of the two feeds to connect to a standard sky dish - not a must, more a nice to have. Or I can buy second spiderbox/DISEqC compatible receiver if needs be.

Maybe you can pm me with a ball park figure if you are comfortable with details provided and your contact details and we can take discussions from there. I live in Belfast.

Thx
 
I will contact you via pm facility that will be enabled soon mate.

Chris
 
PMs are enabled for firebuddie
 
Hi mate

PM sent with contact details included.



firebuddie said:
Hi Chris,

I currently have a fixed sky dish (pole mounted at back of house) running to a single room (downstairs living room).

I have just bought a new spiderbox SD5000 receiver. If possible, I am looking for following setup using my existing sky dish (if it is suitable):

- LNBs added to pick up 13e Hotbird, 19e Astra 1 as well as 28e Astra.
- DISEqC switch(es) to auto control LNB (receiver supports all DISEqC protocols, i.e. 1.0, 1.1 and 1.2)
- New additional second line to upstairs back bedroom (is right below where dish is installed). This line will connect to new spiderbox receiver.
Ideally though the new setup will allow either of the two feeds to connect to a standard sky dish - not a must, more a nice to have. Or I can buy second spiderbox/DISEqC compatible receiver if needs be.

Maybe you can pm me with a ball park figure if you are comfortable with details provided and your contact details and we can take discussions from there. I live in Belfast.

Thx
Click to expand...
 
rcollen said:
Morning Chris, Im after a full install on a new build in the Portadown area if your interesting in pricing it?

Could a kind administrator temp enable my PM for futher details please?
Click to expand...

Cheers Chris for the sat install. Top job would highly recommend!!
 
Hi Chris
My 1M motorised dish needs realigned after last weeks storm, I just cant get it myself, can you pm me if you want to have a crack at it??

Thanks
 
carraig said:
Hi Chris
My 1M motorised dish needs realigned after last weeks storm, I just cant get it myself, can you pm me if you want to have a crack at it??

Thanks
Click to expand...

Thats no bother carraig i will pm you once your privilege has been enabled.

Can a mod please enable pm's for contact.

Thanks Chris
 
PM enabled.:)
 
Back
Top