Hi,
After some great help from you guys on this forum I have two tv's now running off the RF2 port of my Sky+ box and a tvlink T140 powered splitter.
But, the two TV's running off the RF2 don't have a good picture
The two tv's are a 37" plasma, and a 22" CRT.
As you can see from the two pictures I have straight lines running at about 45 degrees. Does anyone know what might be causing this?
The two satellite cables, and the incoming rf feed travel down from the loft in a 1 inch tube to the Sky+ box location, and the two rf2 feeds back to the tv's also travel back up that same tube to the loft where they then go off to their respective locations. All the cable used is black satellite grade (tower cable from B&Q) screened cable.
Any help would be much appreciated.
Martin
After some great help from you guys on this forum I have two tv's now running off the RF2 port of my Sky+ box and a tvlink T140 powered splitter.
But, the two TV's running off the RF2 don't have a good picture
The two tv's are a 37" plasma, and a 22" CRT.As you can see from the two pictures I have straight lines running at about 45 degrees. Does anyone know what might be causing this?
The two satellite cables, and the incoming rf feed travel down from the loft in a 1 inch tube to the Sky+ box location, and the two rf2 feeds back to the tv's also travel back up that same tube to the loft where they then go off to their respective locations. All the cable used is black satellite grade (tower cable from B&Q) screened cable.
Any help would be much appreciated.
Martin
