For the use you want, it does not matter if you have legacy exits, if you have a future use, perfect.
All in general have similar characteristics (Inverto).
Remember to buy for the receiver where you will use it, a 1x4 splitter with power supply if the tuner does not have an internal loop.
In general, I do not have them, but I am in contact with 2 colleagues who have the one you bought and also the programmable one of 32SCR.
The sensitivity does not indicate it, it only says maximum 1dB of noise figure, if we compare with its normal brothers, the IBU of0.2dB that has a maximum of 0.7dB., We think that they really are 0.5dB of noise figure.
An important point, they are not worth to do blind search of channels.
They are very slow in the response, the receiver using orders "DiSEqC" asks the LNB to send such frequency (band and polarity), before it responds, the receiver already asks for another frequency, after doing a blind search in Astra 19E , it only finds 88 channels of 1438 channels that the satellite has.
If you perform a normal / manual search by tp of the list that you have, you will not have problems.
The limitation of the SR has the tuner of the receiver (minimum SR1000), I can confirm that up to SR1660 (BOM channel) works well.
In general when changing channels if there is only one tuner feeding the LNB, you can say for a few seconds "no signal", but you quickly have a signal,
The programmable unicable LNB (24/32) is cheaper and can be more interesting.
You have to confirm with the store that they are programmed from the factory with the features of 24 / 32SCR, the first series of a few years ago are not factory programmed and if they send you one of these does not work.
Ask the programmer is nonsense for one (€ 150).
Topic consumption, those of 4SCR is normal, even with motor.
The programmable is 400mAmp maximum, plus 350mAmp peak engine (250mAmp in normal movement), is well above the 400-500mamp that have the receivers.
In the tests with programmable 32SCR and receiver with tuner FBC (4+4 tuner) with motor, it does not burn anything, the companion that has it does not have equipment to really see the consumption of the LNB+the motor.
I said, since I do not burn and it's already going for 1 month, we think that more than 1 tuner feeds the whole.
I have Megasat Unicable II Diavolo 24SCR. for the VU + Ultimo4K and also for the VU + DUO2.
----------------
Para el uso que quieres, da igual que tenga salidas legacy, si tienes planteado un futuro uso, perfecto.
Todos en general tienen similares caracteristicas (Inverto).
Recuerda comprar para el receptor donde lo utilizaras, un repartidor de 1x4 con paso de alimentacion si no tiene bucle interno los tuner.
En general, no los tengo, pero estoy en contacto con 2 compañeros que tienen el que compraste y tambien el programable de 32SCR.
La sensibilidad no la indica, solo dice maximo 1dB de figura de ruido, si comparamos con sus hermanos normales, los IBU de0.2dB que tiene como maximo 0.7dB., pensemos que realmente son de 0.5dB de figura de ruido.
Un punto importante, no valen para hacer busqueda ciegas de canales.
Son muy lentos en la respuesta, el receptor usando ordenes "DiSEqC" le pide al LNB que le mande tal frecuencia (banda y polaridad), antes de que responda, el receptor ya pide otra frecuencia, despues de hacer una busqueda ciega en Astra 19E, solo encuentra 88 canales de 1438 canales que tiene el satelite.
Si realizas una busqueda normal/manual por tp de la lista que tengas, no tendras problemas.
La limitacion del SR la tiene el sintonizador del receptor (minimo SR1000), puedo confirmar que hasta SR1660 (canal BOM) funciona bien.
En general al cambiar de canal si solo hay un tuner alimentando el LNB, puede decir durante unos segundos "sin señal", pero rapidamente tienes señal,
El LNB unicable programable (24/32) es mas barato y puede ser mas interesante.
Tienes que confirmar con la tienda que estan programados de fabrica con las carasteristicas de 24/32SCR, las primeras series de hace unos años no estan programadas de fabrica y si te mandan uno de estos no funciona.
Pedir el programador es tonteria para uno (150€).
Tema consumo, los de 4SCR es normal, incluso con motor.
El programable son 400mAmp maximo, mas 350mAmp de pico del motor (250mAmp en movimiento normal), esta muy por encima de los 400-500mamp que tienen los receptores.
En las pruebas con 32SCR programable y receptor con tuner FBC (4+4 tuner) con motor, no se quemo nada, el compañero que lo tiene no tiene equipo para ver realmente el consumo del LNB + el motor.
Lo dicho, como no se quemo y ya va para 1 mes, pensamos que mas de 1 tuner alimentan el conjunto.
Tengo Megasat Unicable II Diavolo de 24SCR. para el VU+Ultimo4K y tambien para los VU+DUO2.