Irdeto Freecam

Messages
5
Likes
0
My Location
Dubai
#1
I've a irdeto freecam and I would like to know how to enter the keys Via the cam menu on the receiver. I've a Samsung 9500 CI-VIA, can anyone help me out with it
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,712
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#2
This only works when the CAM is in irdeto mode and will only work with irdeto encrypted channels.

But to do it, you need to go into the CAM menu option 4 "Key Board", there are then several options for listing and entering keys.
 
Messages
5
Likes
0
My Location
Dubai
#3
Thanx 4 the help rolfw, but when I got 2 the CAM menu I get these 4 options
1:Status
2:Messages
3: Monitoring
4:Quit
There is No keyboard option anyidea what can be the problem
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,712
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#4
When you go into the status section, what does it tell you and as a metter of interest, what does it say on the CAM.?
 
Messages
5
Likes
0
My Location
Dubai
#5
When I got 2 the status it says, Update & Quit. Behind the CAM it's mentioned P/N: 901275 Rev 1.0 & on the front Irdeto Acess



Kevin
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,712
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#6
Doesn't sound like a Freecam Kevin, the 901275 is a Eurocam part number see HERE it is the first one in the list.

Has the Samsung been patched?
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,712
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#8
Don't think there is Kevin, certainly not according to the guy on that site.

I don't know too much about the Samsung, but certainly some of the models can be patched to make a Eurocam act like a freecam.
 

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#9
There is no way to convert a Euro CAM to a FreeCAM. The hardware is different.
However, your Sammy can be patched so that its internal CAM acts as a universal (multi-encryption) CAM, suitable for using with 6-in-1 funcards and suchlike.

2old
 
Messages
5
Likes
0
My Location
Dubai
#10
Thanx rolfw & 2old 4 u'r help, I'll c if I can get the patch 4 my samsung, the probs is there here in Dubai it's not available with the dealers. Do U know where I can get the patch online
 

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#11
I'm way behind on the Sammy these days. Last time I looked into this (a few months ago) there was a patch which when applied to the receiver's firmware allowed a standard Irdeto Euro CAM to function as a multi-encryption CAM. As an alternative, there was also an emulator for the PC which allowed multi-encryption reception over a Season using the receiver's embedded CAM (not the CI slot).
Anyone else out there have better/more up-tro-date info than this?

Here are the step-by-step instructions for patching the original Samsung DSR9500. The patch can be applied using a small utility on a PC connected via serial cable. But a JTAG interface is required for the later "z" model which no longer allows upgrade of the firmware via serial cable.
http://members.home.nl/ijssgerb/samsung_dsr9500.htm
Here's a patch
http://216.12.210.231/~satcity/DSR9500_5-1.zip

If you need to make a JTAG interface to program the receiver, you can find detailed instructions & photos here (though this one is in Swedish): http://freetv.host.sk/Samsung_9500_Jtag_Patch/samsung_jtag_guide.htm


Some other resources:

Here's a good Dutch site (only drawback - assuming you are not Dutch - is the language): http://www.satsupport.com/samsung/
You can get the patch there.

More info and downloads here too:
http://www.samsungstb.net/

And here, though you need to be a member her to download:
http://hacktv.metropoliglobal.com/Samsung.htm

2old
 
Top