Is Matrix Reloaded any use now?

[satolight]

Hi Guys (and Gals! ...memories of Top of the Pops!!)

I have a Matrix Reloaded with 1.23 version of software. Pointing at Hotbird and Astra 19.2. It has worked fine for years with usual key changes and upgrading using Fun Cards.
Just recently the channels it decodes seems to have gone down to just a handful of music channels.
I have looked on here and on the net and I am stumped.
RolfW I need your help!!!
Is the Matrix Reloaded any good now for decoding channels or do I need new software?
Can the Matrix Reloaded decode Viaccess2 Irdeto2 Nagravision?
How can I input the AES key?
Are the channels on Hispasat more easily available, if so I'll reposition my dish!!
Sorry for all the questions but I've tried to get definitive answers looking at the net and a lot of the information seems to be old postings and not relevant anymore.

Cheers,

 

[Channel Hopper]

You should still be able to get Mediasat off 30W with the, some good films on there.

And the Swiss channels will still be running with the latest codes, though these change on a weekly basis

As for TPS, you need to be fast to keep up with the 30minute upgrades..

 

[satolight]

Thanks for the reply Channel Hopper,
But I have looked on Lyngsat for Medasat channels and I can't see them, are they listed as something different? What are the frequencies.
Also what are the swiss channels you mentioned and are these in English?

Cheers

 

[Channel Hopper]

Sorry, Mediaset.

And yes a couple of Swiss channels have audio carriers in English (or at least when the film/programme is in English)

 

[spamboy]

hi satolight
i,m in the same boat.........i,ve got reloaded and now get nought...has TPS..Multivision..AB Sat..plus others gone...........is this forever?????

Is my CAS 3 and Reloaded cam of no future use??????? isa it a waste of time downloading new keys for my cam??

Opinions and info from anyone on this please

Regards

 

[BGonaSTICK]

Same applies as above... upgrade to the latest firmware, update the keys if possible and try some of these packages out!

Don't ever chuck your old CAMs away - you never know what the future might hold. Your CAS3 will certainly come in handy.

TPS, Multivision and ABsat are currently beyond the capabilities of your CAM however, unless you're faster than lightening with your keychanges.

 

[MARVIN34]

you can use matrix reloaded with the new K3 card you need to update the cam with UCAS3[1].0-DUMP