CB65
Regular Member
- Joined
- Apr 2, 2004
- Messages
- 39
- Reaction score
- 0
- Points
- 0
- Age
- 63
- My Satellite Setup
-
Technomate 5400 CI+ USB, 70CM Motorised dish, XCAM, Infinity USB Pheonix
Panasonic Freeview
- My Location
- Dorset England
Would anyone know if my receiver is dead or can it be made to work again.
I tried to change channel this afternoon with the remote, wouldn't work. I changed batteries, still wouldn't work, none of the buttons. Couldn't change the channels with the box buttons either. Couldn't even switch it off with the button on the front.
I forgot there was a rocker switch on the rear panel and pulled the cable out to cut the power. When I put it back in display showed 9999 but nothing would work. I've tried switching off and back on a few times with the rocker switch but nothing, the display has shown 8 8, or 888 since but no function at all and certainly no picture.
Any help or advice would be much appreciated.
I tried to change channel this afternoon with the remote, wouldn't work. I changed batteries, still wouldn't work, none of the buttons. Couldn't change the channels with the box buttons either. Couldn't even switch it off with the button on the front.
I forgot there was a rocker switch on the rear panel and pulled the cable out to cut the power. When I put it back in display showed 9999 but nothing would work. I've tried switching off and back on a few times with the rocker switch but nothing, the display has shown 8 8, or 888 since but no function at all and certainly no picture.
Any help or advice would be much appreciated.
I guess all the Technomate owning members are watching the films on Premiere.