Jtag FTA Receivers

Node

Regular Member
Messages
28
Likes
0
#1
Is it not possible to Jtag FTA receivers using the program called "jkeys" and read off the data in the Eeprom. Thereby reprogramming with whatever data you want in the Eeprom. Most if not all FTA receivers have the port for this on the board position next to the TSOP chip.
 

Llew

cerca trova...
Staff member
Messages
14,464
Likes
3,403
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#2
Node said:
Is it not possible to Jtag FTA receivers using the program called "jkeys" and read off the data in the Eeprom. Thereby reprogramming with whatever data you want in the Eeprom. Most if not all FTA receivers have the port for this on the board position next to the TSOP chip.
Hi Node
Yes, it's possible to upload/download data from receivers using the STi chip.
Unfortunately receivers such as the Fortec have a serial port, which can only be used for uploading flash files and channel data.
Accessing the STi chip through its JTAG interface is possible with a program such as 'jkeys'.
This site has instructions for making an interface and the jkeys program itself.
http://www.al7bar.tk/forums/forumdisplay.php?f=54

Llew
 
Top