A
archive10
Guest
Found this dish in the corporate basement the other day.
Clearly a Laminas OFC 1200.
Never used, but had been moving around for a decade or so, as company department moved addresses.
- and now deemed "will never use".
Thus appropriated into the st1 collection where it might see some usage one day.
Even comes with heating element for those cold cold winter nights...
(not quite sure if I would use it...)
Also came with a nice tripod (again, a Laminas product).
Includes top end bridging from the very-unusable 75 mm (not!) to 60 mm diameter.
May consider to angle-grind off the top part to make it fit Prodelin and CM mounts.
Downside is that it came with no feed-arms or LNB holder (deja-vu...)
I need to source those!
[Yes, @RimaNTSS, I could make my own etc, but...]
Is there a good source for spare parts for Laminas dishes?
Clearly a Laminas OFC 1200.
Never used, but had been moving around for a decade or so, as company department moved addresses.
- and now deemed "will never use".
Thus appropriated into the st1 collection where it might see some usage one day.
Even comes with heating element for those cold cold winter nights...
(not quite sure if I would use it...)
Also came with a nice tripod (again, a Laminas product).
Includes top end bridging from the very-unusable 75 mm (not!) to 60 mm diameter.
May consider to angle-grind off the top part to make it fit Prodelin and CM mounts.
Downside is that it came with no feed-arms or LNB holder (deja-vu...)
I need to source those!
[Yes, @RimaNTSS, I could make my own etc, but...]
Is there a good source for spare parts for Laminas dishes?
Last edited by a moderator:
