Reply to thread

Message: <blockquote data-quote="Tony B" data-source="post: 6020">Many thanks for the advice.  This would be good for the situation where I had actually removed the LNB arm and needed to refit it so that it was in the right hotspot, but in this case it is undisturbed relative to the dish.  My challenge was to get the face of the dish elevated correctly, given the fact that it is not a prime focus type.  To the rescue come Triax (owners of the LH brand) who have today confirmed that all LH offset dishes are at an offset of 22.5 degrees.The polar angle was untouched during removal, so, OK, now all I need to do is get an accurate 1 degree West azimuth....Thanks again!Tony B</blockquote>