Loop out on satellite receiver

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
Hello ,

Wondering if any one can shine some light on this as it driving me mad!!!

I am trying to run a second tv off the loop out of the satellite reciever.
I have a picture on my meter but when i connect the cable to the tv arieal
I can't get a picture.

what do you need to do on the second tv to get picture ,try doing a scan but not picking up the signal??

any advice would be much appreciated
 
A

Archive-8

Guest
Hello ,

Wondering if any one can shine some light on this as it driving me mad!!!

I am trying to run a second tv off the loop out of the satellite reciever.
I have a picture on my meter but when i connect the cable to the tv arieal
I can't get a picture.

what do you need to do on the second tv to get picture ,try doing a scan but not picking up the signal??

any advice would be much appreciated

You need to connect the lnb "loop through" cable to a sat tuner, and not to a tv tuner.
 

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
thanks for your response but can you explain. I have connected the cable to the loop out on the satellite receiver and the other end is plugged into the tv aerial ??
 

Mickha

Super Moderator
Staff member
Joined
Dec 10, 2004
Messages
5,974
Reaction score
884
Points
113
My Satellite Setup
1.2M Channel Master, 1224 motor, VU+ Duo 2
My Location
North West
The loop out, on your satellite receiver, carries a satellite signal, so unless your television has a Satellite tuner, and not just a digital terrestrial tuner, it will not work.
You either need another satellite receiver, or a television with a built in satellite tuner.
Either way this is not ideal, it is better to have a twin, or quad, LNB, 2, or 4, outputs, and run a direct cable to a second satellite tuner.
Please post the make/model of your television, to determine if it has an inbuilt satellite tuner.
 

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
yes what you say is correct and I understand what your saying.I need to explain , It is for a Bar who wants to have 2 tv's working with the same channels from one sat reciever.

I've seen it working like this, I put a satellite dish in for a customer who already had a sky box with a cable going to her bedroom TV and plugged into her tv aerial. all I did was connect the cable to loop out on the sky box . Also seen it work like this in other bars...
 

Mickha

Super Moderator
Staff member
Joined
Dec 10, 2004
Messages
5,974
Reaction score
884
Points
113
My Satellite Setup
1.2M Channel Master, 1224 motor, VU+ Duo 2
My Location
North West
As Chris points out, the loop out, or LNB out, on a satellite receiver, is for a satellite feed, to a second satellite tuner, the RF out is something completely different.
Please post the satellite make/model, or pictures, of the rear of the satellite receiver.
 

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
Arh think this must be it, I am connecting to loop out next to the lnb tuner. I have tried a sly box and a GI box but both dont have rf out , I think this is how you do it...I will have to try this, thanks for your help!!!
 

blademedia

Member
Joined
Jul 29, 2016
Messages
1,941
Reaction score
1,920
Points
113
My Satellite Setup
Sky
My Location
UK
I use the loop out, how I connect mine is coax from antenna to sat box rf in, then I use a length of coax with two f connectors, one goes on the loop out on sat box, the other goes to my tv tuner,

If you wanted to connect say two sat boxes you would do the same process, but loop out to rf in,

Picture below is using the loop out set top box to left tv tuner to right
IMG_3233.JPG
 

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
thanks Blademedia, so the feed from dish connects as usual to lnb in,can I go rf out to the other Tv or do I have to go Loop out to rf in and then rf out to the Tv and then scan the TV??
 

blademedia

Member
Joined
Jul 29, 2016
Messages
1,941
Reaction score
1,920
Points
113
My Satellite Setup
Sky
My Location
UK
Coax from dish leave as normal, use the loop out to tv tuner, then scan tv.
 

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
ok rf out??
thank Blademedia, I knew some one on here would have the answer!!!
 

Scubadan77

Regular Member
Joined
Nov 23, 2015
Messages
30
Reaction score
6
Points
8
Age
47
My Satellite Setup
Famaval 1.4m Off set dish, Gi8120 Satellite receiver
My Location
Oriheula Costa, Spain
thanks for explaining and pictures. how come your rf out/loop out is a f connector.
I have a reciever and the rf out is aerial connection and Lnb loop out is a f connector??
 

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
If the bar's satellite receiver only has an LNB in and loop through and the other TV only has an RF tuner, then you either need a second satellite receiver to loop the IF signal into for the second TV, or you can use an RF modulator connected to the scart output of the satellite receiver and send a duplicate signal via that.

Why not provide details of the satellite receiver, possibly with pictures, it appears that there is confusion between RF and IF and whilst all satellite receivers have IF (Intermediate Frequency used by satellite receivers) inputs and loopthroughs, many modern ones, do not have RF/UHF (Radio Frequency/Ultra High Frequency used for terrestrial viewing) in and out connectors with built in modulators.
 

John

Enthusiast.
Joined
Jan 1, 2000
Messages
3,726
Reaction score
5,528
Points
113
Location
North Nottinghamshire.
My Satellite Setup
Elite 2.2 PF - CM1.8 - CM1.2 - Gibertini 1.25.
Ku - Ka -C & Ext C.
PC cards-TM5402 receivers.
Promax FSM.
My Location
North Nottinghamshire.
... Or, if the second bar tv set does not have a "Sat" F-type socket signal input (FreeSat tuner) could you use an alternate method of getting a duplicate picture to it by using the HDMI output of your satellite receiver through a 2way HDMI splitter (not switch), to feed the two tv sets with a duplicate signal .... assuming the added 2nd tv set has an HDMI input and the distances between the two tv sets is not too great ??
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,533
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
If the bar's satellite receiver only has an LNB in and loop through and the other TV only has an RF tuner, then you either need a second satellite receiver to loop the IF signal into for the second TV, or you can use an RF modulator connected to the scart output of the satellite receiver and send a duplicate signal via that.

Why not provide details of the satellite receiver, possibly with pictures, it appears that there is confusion between RF and IF and whilst all satellite receivers have IF (Intermediate Frequency used by satellite receivers) inputs and loopthroughs, many modern ones, do not have RF/UHF (Radio Frequency/Ultra High Frequency used for terrestrial viewing) in and out connectors with built in modulators.


The o/p info on the left mentions a Gi8120 receiver but the post suggests this is an installation elsewhere. From a brief look I think the receiver does have an RF loop through, but the receiver itself does not have a modulator , or that it has been disabled in the installation menu (possibly one of those energy saving mode settings by default)

Not all satellite receivers have IF loop through btw, Aston, smaller Humax and Wetek are ones I have come across in the past where connection to anything else is not possible.
 

John

Enthusiast.
Joined
Jan 1, 2000
Messages
3,726
Reaction score
5,528
Points
113
Location
North Nottinghamshire.
My Satellite Setup
Elite 2.2 PF - CM1.8 - CM1.2 - Gibertini 1.25.
Ku - Ka -C & Ext C.
PC cards-TM5402 receivers.
Promax FSM.
My Location
North Nottinghamshire.
... Or, if the second bar tv set does not have a "Sat" F-type socket signal input (FreeSat tuner) could you use an alternate method of getting a duplicate picture to it by using the HDMI output of your satellite receiver through a 2way HDMI splitter (not switch), to feed the two tv sets with a duplicate signal .... assuming the added 2nd tv set has an HDMI input and the distances between the two tv sets is not too great ??

Meant to say .... if your second tv does not have this connection then is the HDMI option worth considering
 

Attachments

  • Added tv connection....jpg
    Added tv connection....jpg
    820.3 KB · Views: 18

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Not all satellite receivers have IF loop through btw, Aston, smaller Humax and Wetek are ones I have come across in the past where connection to anything else is not possible.

Yes, realised I'd written that incorrectly after posting.
 

a33

Specialised Contributor
Joined
Sep 24, 2009
Messages
1,237
Reaction score
710
Points
113
Age
63
My Satellite Setup
XSAT410
Rebox RE-9000
My Location
NL
I have a reciever and the rf out is aerial connection and Lnb loop out is a f connector??

If the second TV doesn't have a satellite tuner but has an antenna input, the RF-out (aerial connection) is a simple analogue solution, using just one simple cable.
Another analogue solution would be using the video- and audio-signals from a SCART connection (or cinch connectors).

If you want a digital signal to the second TV, satellite loopthrough signal is required, or HDMI.

So please sum up the available outputs of your receiver (and possibly of your first TV; you can probably connect from there as well),
and sum up all the available inputs of your second TV. Then we can give you the best advice.

Photos could help here, if you don't know what connector is meant for what.

greetz,
A33
 
Top