freebird
Regular Member
- Joined
- Dec 8, 2002
- Messages
- 16
- Reaction score
- 0
- Points
- 0
- Age
- 80
- Website
- Visit site
- My Location
- Loughborough Leicestershire
Help Needed,
Loaded the Flash Hex into the Multiprog Flash Memory
Then Loaded The SXFun 6in1 Ext Eeprom.
Programmed the card and inserted it into the CAM when asked.
I then get the following message;
Cable removed or Baudrate too high for this STB
PLEASE TRY AGAIN.
Can anyone tell me where I am going wrong.
Phil
Loaded the Flash Hex into the Multiprog Flash Memory
Then Loaded The SXFun 6in1 Ext Eeprom.
Programmed the card and inserted it into the CAM when asked.
I then get the following message;
Cable removed or Baudrate too high for this STB
PLEASE TRY AGAIN.
Can anyone tell me where I am going wrong.
Phil