Matrix Reloaded CAM

P

Pandora

Member
Just got at MR CAM and have a few questions:

The cam works without card, so why do people use 6in1 files ?

How do i update the keys ?

I tried inserting a viaccess funcard (not 6in1) but the screen did not clear, untill i took out the card... why cant the cam read the funcard ? Does the funcard have to be a special type ?

If i want to use a original Canal Digital card, can i use it in the MR CAM ? Or does the CAM need some special files loaded ? (using v. 1.06 on the MR CAM)
 
Pandora

The MR is designed to decrypt channels without a 6 in 1 card. All done by software in the cam itself. It requires updating from time to time which can be done with 2 funcard 6's or 3 funcard 5's. It's necessary to download the software on to the funcards first of course. Alternatively the cam can be updated with a CAS interface. As far as I know the MR will decrypt Irdeto and Connax channles with legit cards.

Have a read through this site for all the info.
 
First of all you need to Initially load MR files 1.055 from the www matrixcam.com site, and as Jimbo has mentioned which can be done with 2 funcard 6's or 3 funcard 5's...this is done in your recievers setup menu with the MR inserted and should prompt you for card one etc!
 
jimbo said:
Pandora

The MR is designed to decrypt channels without a 6 in 1 card. All done by software in the cam itself. It requires updating from time to time which can be done with 2 funcard 6's or 3 funcard 5's. It's necessary to download the software on to the funcards first of course.

Have a read through this site for all the info.
Click to expand...
Okay, this updating with cards, is that to update in case of code changes or what do the updates do ?

Alternative: How do i update the codes ?
 
Wether it be fun 6's or MR, files have to be updated on a regular basis...see Nobbly's links!
 
if you just want to update the keys then download one of the 6 in 1 files that says it has the mr keys with it.
now look in the text file to get the keys required.
now go throught your reciever menu to find the key foe changing.
enter the new key.
save and exit.
some times it is quicker to load your card as 6 in 1 and put in in the cam, but no AU.

you only need the multiple fun cards when you want to change the firmware in the cam.

po
 
Or alternatively and a lot quicker too is to program the MR in a laptop Ci slot....
 
Pandora said:
Been looking at lot there, but i just cannot seem to find anything about the use of the MR, updating codes etc.

Where on the site should one be looking ?
Click to expand...

Ok now that you have browsed the MR site and hopefully gathered info on this cam, if you look in the top section of the forum you will see 'Nobbly's Links'. There you will find the links for updated files for the MR m8
 
Back
Top