Mondeal FTA -9000 Super setup hlep please

Joined
May 13, 2008
Messages
1
Reaction score
0
Points
0
Age
42
My Satellite Setup
60mm dish with FTA-9000 super
My Location
herts
Hi guys

I have got somebody to installed and did the alignment to point to EB9 today, but i have got the problem to setup my receiver to receive CCTV4 and TVB chanels from EB9.

can anyone tell me how to setp up the antenna in following;

1. Antenna ?
2. Satellite?
3. LNB1 ?
4. LNB2 ?
5. 0/12 Volt ?
6. 22 khz tone ?
7. DisEqc ?
8. c/ku band control ?

under the chanels serch, how can I setup in following;

1. Transponder ?
2. Frequency?
3. Symbil rate?
4. Polarization?
5. 22 khz?

many thanks in advance for your kind help
 

Topper

Amo Amas Amant Admin
Staff member
Joined
Nov 18, 2004
Messages
23,590
Reaction score
3,821
Points
113
Age
67
My Satellite Setup
1.2Mtr Polar MTG yes it has been on the arc for 35 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
Welcome to the forum jackychen_xiao

Well that was your first mistake, if you have paid someone good money to align your dish and let him go without him scanning in the channels you want to watch then you are a bit of a silly billy! Are you suggesting he has not scanned any channels at all, or just not the ones you wanted.

Without a full specification of what lnb is installed it will be very difficult for someone one here to know what information you require in your stb unless they have the same make and model themselves. The details you require for channel search can be found here

I would like to suggest a universal lnb has been installed but I cannot know for sure

What does it say in the manual that came with your stb, go on don't tell me the man down the pub where you bought it from did not give you a manual for it!
 
Top