Monoblock single LNB in DM800

R

roxy2642

Member
My Satellite Setup
BSNL IPTV
WINDOWS 7
My Location
Punjab
Guys

I have a Dm800 with Single Mono-block LNB + Universal LNB (w/o Motor)connected with 2 Switch Diseqc.

I could configure in advance setting the Universal LNB which is giving me Sat 91E and i could configure one LNB out of 2 in dual Mono-block which gives me 93E and 95E but unfortunately i am unable to configure or make necessary setting in Advance tuner settings to get channels from 2nd LNB which should search 100.5E in Single Mono-block LNB.

Means i could only search one LNB out of two in mono-block LNB.

Please help me to make necessary settings in Diseqc settings so that i ca get the both lnb work in dual Mono - block LNB

thanks in advance
 
You are cascading diseqc 1.0 switches, (one in the monoblock and your 2x1) which should not be done if you want it to work properly.

You can either fit 2 separate lnbs instead of the monoblock, or use an uncommitted swtitch instead of the one you have.
 
Back
Top