motor limiter

[Magnu420]

ive got a tm2600 motor which im gonna put on a dish,now i wont be able to get everything
but will get some of the sats in the sky,do i need to set the limiter on the motor which atm
set as factory settin 70 degree east to 70 degree west,do i set it so say i get 40 degree
east and 30 degree west or just leave it as it is at factory settin,also i got a new lnb do i need to skew this to 75.9°(an arrow going anticlockwise) as dishpointer says or set it
so that lnb connection is pointin d/wards

tia...

 

[Mickha]

You only need to change the limits if the dish is likely to hit something, like a wall, if it goes too far, you can usually set the limits in your receiver.

 

[Chris76]

The dm600 has limits built into it mate but only use them as magnu420 has already said if it going to hit the wall. Also you will need to set the motor to thor 1w and use this as your due south satellite and there will be no skew on the lnb as that is your due south reference omce found hit the reset and if you have followed the tut correctly you should get the arc ok