WyrTwister
Member
- Joined
- Jun 15, 2004
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Age
- 74
I have a Stab 90 motor set up on a standard linear Ku LNBF ( in North America ) . The sigmal meter wotks fine when I have it connected between the motor & the LNBF . Whin I gring it inside & connect it between the DVB-S PCI card & the motor , it does not work .
Any ideas / suggestions ?
Thanks ,
Wyr
Any ideas / suggestions ?
Thanks ,
Wyr