motorized dish

B

Big-Apple

Regular Member
My Satellite Setup
2x Dm800
1xDm7000
My Location
CEE
any of u are using motorized dish ? if so which type ? automatic GO TO X by diseq or manual ? due mine LNB is down i still dont know what to
get which dish remove manual and put diseq motor or remain with manual with positioner. :(
 
Many of our members have motorised dishes and use everything from usals to v-box positioners depending on the size of the dish being moved.
 
A metre size or less, generally a diseqc motor is sufficient. Any larger then normally a 36v actuator/ motor would be used.
i have a 1m dish, and run it off a diseqc motor. I use USALS, as it is quicker to set up.
 
110cm Famaval 36v motor manual . I met few ppl in net with this famous moteck [max 120cm] point is they have access do their dishes when mine dish is on chimney.
 
I use an SG2100 motor on a 90cm dish for Ku Band, and a 9' Mesh dish with an actuator for C-Band, both hooked to my Dreambox DM800HDseI u

se USALS for KU Band and right now just motor over manually for C-Band, have not managed to use DiSEQ for manual tweaking yet, when I nudge over to the signal (Then save) it never really repeats the position for me.
 
ok after mine friendly dish-man visited me mine motorized dish with manual motor will be removed and i will be forced to change from chimney to other place

basic question is what setting do i need to change using this moteck all i know is to setup latitute anything more ?
 
Back
Top