Motorized satellite dish with 3 output LNB

[a33]

Okay. I going to buy a Quad LNB.

So I can stop trying to help you to set it up with the existing LNB, under Unicable/JESS/dCSS/... ?

 

[ozumo]

(It is the same protocol, just umpty more userbands, instead of just 8 userbands. So I would not expect to see any change.
When he uses a userband <=8, then the it would not matter which one he chooses? Or are you expecting a change, by this?)

I just saw EN50607 on the site with the LNB details you linked to earlier, and how it was needed for userbands 9-24. I wondered if not using EN50607 limited the LNB to userbands 1-8, and as the Canal receiver is set to higher userbands it may have caused it to no longer work

I've never used Unicable (or the many other names the system has) so I may also be talking nonsense, it wouldn't be the first time!

 

[a33]

@ozumo :
If you want to know more:

EN50607 (JESS) is developed by Jultec.
Some info on this one-cable channel stacking system is on their website (in german): Jultec GmbH Technische Infos
Their technical info site (with many sub-sites): JULTEC Technische Infos

IMHO, the german sat-forums have the most expertise of unicable setups. I learned a lot from reading there. But I've never used Unicable myself as well...


Greetz,
A33

 

[Haa-sat]

I want to thank you all for your help. Now both receivers work without problems. I solved this by replacing the SCR LNB with the Quad LNB. This was instructive and I would like to thank you for the good help!