multiroom as in Hotel Sattelite System ?

[stefan]

Hi all, this is my problem, I have sattelite dish with one LNB, and one receiver, now I have 6 rooms in my house with six Tv's , I'd like to make multiroom system but only with one receiver, is it possible, like in hotels only TV to be on desk without second or multi receivers.

Six persons to watch different channels.

thanks all

 

[2cvbloke]

For six people to watch six different channels, you need six separate boxes, with each one set to a different UHF frequency, I don't know how, or even if, it would work with a TV-Link setup though...

 

[satelliteman]

Possible to distribute one channel to six zones by using the receivers RF modulator and feeding that into a distribution amplifier to serve the rooms.

[Thread moved to appropriate section].

 

[satelliteman]

For six people to watch six different channels, you need six separate boxes, with each one set to a different UHF frequency, I don't know how, or even if, it would work with a TV-Link setup though...

Spc4 would do that ;)

 

[stefan]

Thanks guys for fast answers, does this product Spc4 I need for every room ? Can someone be more specific

 

[satelliteman]

No forget the Spc4, that's for more than one receiver as quoted in member 2cv's post.

 

[stefan]

any solution for my problem ?

 

[PaulR]

As 2Cv says, for six different channels you need six receivers.

Do the receivers HAVE to be in a different place to the TVs? It would be far easier to put each receiver next to a TV and then connect with a scart (peritel) or HDMI lead.

You will also need to change your LNB. It may be possible to fit an eight ouput LNB (Octo) but we really need to know which satellite you are watching and what size and type of satellite dish you have before going into specific suggestions.

 

[satelliteman]

Can you confirm you want the one satellite channel viewed in all rooms OR different channels available as your first post covers two different systems. The latter can be achieved with receivers in one location by the use of a complex matrix switching distribution system or by RF as briefly mentioned.

 

[Analoguesat]

any solution for my problem ?

Yes - 6 different receivers each with an individual cable from the dish.

 

[stefan]

ok this is my equipment

one Sky dish
one LNB
one SKy box
six rooms with 6 TV's

I'd like to watch different channels from only one sattelite in every room from one sky box

every room to be able to change the channels

I can't explain very good sorry for my english

 

[satelliteman]

ok this is my equipment

one Sky dish
one LNB
one SKy box
six rooms with 6 TV's

I'd like to watch different channels from only one sattelite in every room from one sky box

every room to be able to change the channels

I can't explain very good sorry for my english

It's not possible to watch different channels from one receiver in 6 rooms.

 

[PaulR]

You can't have different channels for each room from one receiver - simple as that.

 

[mikeisyou]

Possible to distribute one channel to six zones by using the receivers RF modulator and feeding that into a distribution amplifier to serve the rooms.

i have this system and the picture is not 100%