My Humble Setup!

bostephen

bostephen

Member
My Satellite Setup
1.8 m C Band Dish on
PAS7_10 @ 68.5°E, 1.8 m Astra C Band Dish (for roaming) but now on Thaicom 2/5 @ 78.5, 90 cm (GTV) offset on Sirius 4; ALL FTA and Astravox VSR-400 Reciever, I Still have 2 analogue recievers...(4 what? noo one knows!!)
My Location
Africa, Uganda (Log. 32.8°E, Lat. 0.7° N)
What do you think?

I still have a problem though; stated here
_http://www.satellites.co.uk/satellite/multi-receiver-tv-systems/153413-multiswitch-vs-diseqc-switch.html#post850642
 

Attachments

  • My_Dish_DSC04692_bosteve.webp
    My_Dish_DSC04692_bosteve.webp
    22.1 KB · Views: 481
  • DiSEqC_switch_and_lnb_DSC04687_bosteve.webp
    DiSEqC_switch_and_lnb_DSC04687_bosteve.webp
    30.1 KB · Views: 377
  • Combo_lnb_DSC04686_bosteve1.webp
    Combo_lnb_DSC04686_bosteve1.webp
    24.6 KB · Views: 396
Is that Sellotape (Scotch Tape) you're using around the LNB body and (if my eyes don't deceive me!) around the F connector/Cable?

If so, it won't last long as protection against moisture ingress. I don't know if you can get self amalgamating tape where you are located, but using that on the F Plug/Cable would be a much better idea :)
 
bostephen said:
What do you think?

I still have a problem though; stated here
_http://www.satellites.co.uk/satellite/multi-receiver-tv-systems/153413-multiswitch-vs-diseqc-switch.html#post850642
Click to expand...

Stephen-

Is that a dual C/KU LNBF? Did you make it?

If so, I have two different makes and neither work good on KU when C Band is peaked.

What is your experience?

Diseqc operates from a serial data sent from receiver, 22Khz operates from tone on or off from receiver. If the receiver is powered on while moving cables you will ZAP that Diseqc port, time to get a new one.

If your KU lnbf is a Universal it has a built in 22kz switch, if a standard 10750 no switch. Your receiver would be configured for Diseqc first then 22Khz on or off second.

Maybe this will help; _http://www.satelliteguys.us/fta-mpeg2-faqs/133444-diseqc-1-0-1-1-1-2-1-3-whats-all-mean.html
 

Attachments

  • 22KhzSwitch.webp
    22KhzSwitch.webp
    18.4 KB · Views: 139
Tivù said:
Is that Sellotape (Scotch Tape) you're using around the LNB body and (if my eyes don't deceive me!) around the F connector/Cable?

If so, it won't last long as protection against moisture ingress. I don't know if you can get self amalgamating tape where you are located, but using that on the F Plug/Cable would be a much better idea :)
Click to expand...

Sure it is Sellotape! I just worked with the available materials. I'm not sure of the existence of self amalgamating tape in our shops, but will look for it. The Sellotape held the things for two weeks till I put wood glue-I dont know how long that can work on those metals.

What I experienced though - I am going to trouble shoot, was loss of signal.
 
If you cant get self amalgam tape then duck (gaffer) tape is better than sellotape - its not ideal but will last a lot longer !
 
Thanks Analoguesat;

How about WOOD GLUE (the type that is milky-white and turns like plastic when dry)? I have it at home for my miscellenious, and have already deployed it on the lnbs.
 
It sounds like you are talking about PVA glue (White Glue). PVA Glue is not water proof, so I wouldnt recommend it.

I'd imagine it would get brittle and break up from exposure to the elements.
 
bostephen said:
The list of sats I could tap is actually longer, .

Sat Band Distance from my LNB
* Intelsat 906 at 64.2°E C (4.3° east of my lnb)

* Intelsat 902 at 62.0°E C/Ku (is 6.5° east of my lnb)

* NSS 703 at 57.0°E C/Ku (is 11.5° west of my lnb)

* Thaicom 2/5 78.5°E C/Ku (is 10° east of my lnb)
Click to expand...


Arrangement LNB for Uganda.
View attachment 23100

With Intelsat 902 at 62.0°E
View attachment 23101
Kind from outside sat. A step of a grid of 10 mm.
 

Attachments

  • pic.multifeed.gif
    pic.multifeed.gif
    5.3 KB · Views: 115
  • pic.multifeed1.gif
    pic.multifeed1.gif
    5.5 KB · Views: 96
First attempt of trying to get IS 906 yeilded nothing this weekend, but will proceed to do another trial over the weekend. Thanks all FTA-wishers.
 
bostephen said:
First attempt of trying to get IS 906 yeilded nothing this weekend, but will proceed to do another trial over the weekend. Thanks all FTA-wishers.
Click to expand...
bostephen,the size Dish 1.8 m., possibly, small.
 
compufunk said:
It sounds like you are talking about PVA glue (White Glue). PVA Glue is not water proof, so I wouldnt recommend it.

I'd imagine it would get brittle and break up from exposure to the elements.
Click to expand...



Hi sat-mates, thanks for the assistance you gave me last year when i had alot of questions. In July, we were talking about whether the wood glue would hold my combo LNBs. Well, am happy to tell u that the glue has held till today with no problem. In trestingly, it has even survived an el nino. Keep up the fire. See u again.
 
In the old days it used to be possible to get a big plastic cover that would go over the LNB. You could always make one from a big white plastic bottle to keep the sun and rain off, if the glue ever starts to wear off. :)
 
Satcom1 said:
Stephen-

Is that a dual C/KU LNBF? Did you make it?

If so, I have two different makes and neither work good on KU when C Band is peaked.

What is your experience?

Diseqc operates from a serial data sent from receiver, 22Khz operates from tone on or off from receiver. If the receiver is powered on while moving cables you will ZAP that Diseqc port, time to get a new one.

If your KU lnbf is a Universal it has a built in 22kz switch, if a standard 10750 no switch. Your receiver would be configured for Diseqc first then 22Khz on or off second.

Maybe this will help; _http://www.satelliteguys.us/fta-mpeg2-faqs/133444-diseqc-1-0-1-1-1-2-1-3-whats-all-mean.html
Click to expand...

For sure I forgot and one day I blew ports 1 and 2! There is a day i thought i had blown 3 when the middle copper wire touched the side of the port and there was a small spark. Fortunatly, it still works.
 
hexah said:
In the old days it used to be possible to get a big plastic cover that would go over the LNB. You could always make one from a big white plastic bottle to keep the sun and rain off, if the glue ever starts to wear off. :)
Click to expand...

People in this part of the world also do that, but I was discouraged by the techinician who installed for me that it does not have much work. Besides, this has showed me it really works. Every Monday, I have carried that lnb combo upcountry to work, and carry it back on Friday for more than a year now! But nothing haas happened interestingly.
 
Must be bomb proof.
 
kwp58 said:
Arrangement LNB for Uganda.
View attachment 23100

With Intelsat 902 at 62.0°E
View attachment 23101
Kind from outside sat. A step of a grid of 10 mm.
Click to expand...


Thanks kwp58, I now have combined IS 906 C with IS 7?10 Ku band. When I get out of examinations (I am back to school), I'll embark on adding those sats as you advised me. I am now alittle bit wiser! LOL
 
hexah said:
Must be bomb proof.
Click to expand...

The "BOMB" indeed was myself recently when i wanted to combine IS 906 and IS 7/10 Ku, I dismantled it! I suprised myself that it worked untill I told it to stop.

-http://www.satellites.co.uk/forums/members/bostephen-albums-just-pics-picture31060-close-up-kayu-lnbs.html-

The lnb on the right is what I am trying to use to get Thaicom2/5 at 78.5 Deg E
 
Be aware that Thaicom 2 is now off air at 78.5E. She is moving and being redeployed to somewhere around 50E.
 
I think then I still can catch Thaicom 5?

@all satemates, can any one upgrade a digital reciever to do mpeg4 by software or some circuit bord?
 
Back
Top