My new Home in Haifa

[Nachmany]

My setup:

Channel master 1.8M motorized dish.
I will change it to DUAL AXIS system ,and connect it to DRAKE ESR2000XT with IOA600e.

Channel master/Andrew 1.2M motorized dish.
Channel master 0.75m to 4W.

Thanks to Hans from Austria to his good assistance.

 

[Topper]

Very nice setup Nachmany

Kol ha kavod, how I miss those blue skies, what does this setup allow you to receive?

 

[wod]

i guess your big 1.8m is for getting astra 19, hotbird etc or can they be received on the smaller 1.2 dish ?

 

[Nachmany]

Hi Topper,

Thanks to your "kol ha kavod"....
CM 1.8M from 7w to 45E due to I think I have problem with the polar mount.
CM 1.2M from 30w to 80e (Thanks to Hans), I used original CM polar mount.

Wod,

In Israel ,we can receive 19e wide beam from 0.8M......
part of 1L and 1H from 1.8M.
usually I use it to receive 28.2/5E.

 

[satelliteman]

Nice set up

 

[deepbluesky]

DRAKE ESR2000XT with IOA600e, what a rare combination in these days

Nice install. I am also very interested in some reception reports of yours especially when the 1.80m is "ready for takeoff".

I'm wondering if you can get anything off 30W with your 1.20m now ?

 

[T_G]

Nice setup Nachmany, looks very professional and tidy!

 

[CROSSBONES]

Great set up and views!:-worship

Is that the original polar mount for the 1.8m?

 

[Nachmany]

Hi Crossbonds,

Sorry for my late reply, I was visit in AngaCable exabition in Keln/Colon.
There is no original polar mount model for 1.8M.
I made it by self.
You can find only original polar mount to 1.2M, But this is no simply mission....

Thanks,
Nachmany

 

[Nachmany]

Hi dipbluesky,

In Israel, you can receive 30W-1D europe beam, by use only 0.9m.
Take a look in lyngsat.

For receive 30W-1C you need 1.8m and for beter reception use 2.4m dish.

Regards,
Nachmany

 

[deepbluesky]

Thanks Nachmany.

Of course i know the official footprints of Hispasat 1C/D. But those information of yours cannot be read out of them. It's very interesting to see 1C weaker than 1D in Israel. In Southeastern Greece the opposite is the case.

 

[pipino]

fantastic pictures nachmany , your fotos made me buy 3 boxed brand new (channel master aka andrew aka ASC dishes ) 2X1.20 and 1X 1.80 ,i snaped the whole lot for 500€ from a broken telecom company i should have it by the end of this month..cant wait to set them up this summer holidays ..thanx again for the pictures ..very best regards

also found this in ebay if someone intersted===> 300316546324 and 330333780887

 

[Nachmany]

Hi pipino,

Enjoy, and Good luck with your installation.


Nachmany

 

[GreenmanBelg]

also found this in ebay if someone intersted===> 300316546324

Was a snip at $35 if you were living locally.

Good luck with the CM's, look forward to the pics.

 

[pipino]

just received my Brand new Channel master 1.80 ,real heavy beast if i get some time i will set it up before the week end ...regards

 

[CROSSBONES]

Hi Crossbonds,

Sorry for my late reply, I was visit in AngaCable exabition in Keln/Colon.
There is no original polar mount model for 1.8M.
I made it by self.
You can find only original polar mount to 1.2M, But this is no simply mission....

Thanks,
Nachmany

Yes that is why I asked;)

Had one made here........
http://www.satellites.co.uk/satelli...ations/84340-my-home-made-c-master-mount.html

 

[Nachmany]

Hi Crossbonds,

Good job.... :-)

Nachmany

 

[2cocani19]

Hi Nachmany,
I am new in Israel. I am looking for a 1,2m off set dish (Andrew) but I can not find it. Please tell me where did you buy your dish or if you know where can I buy one in the area of Tel Aviv. I am in a big hurry and what I have found is not what I want. Thank you.

 

[pazitush]

Hi Nachmani,
Where did you buy Andrew dish in Israel ??

 

[Topper]

Hi Crossbonds,