N Staffs / Stoke on Trent Area

A

ABARKIE

Regular Member
My Satellite Setup
Vu Duo, ET9000, DM800se, TM5402, Sat BG, Viasat Latvia, JSC

Triax 1.1m, 43cm Motorised.

Archived: TM600, Eagle, Topfield 5000,TM6900
My Location
Find me near J15 M6
Hi,

Got a problem with my set up as follows:

I am running my TM6900 on the motor and am getting "No or Bad Signal" message every so often.

This happens on my AZBox also when I put it onto the motorised dish.

This happens on FTA channels eg BBC World News on 1W.

Alternatively on Dubia Sports on 13E.

There is like a squelchy noise and a freeze and bit of pixelating effect and then it carries on.

I have updated my LNB to a Darkgold 0.1, which I had on previously, as I thought it would be the LNB, but it is still happening.

Also, my motor keeps struggling to move eg: from1W to 13E and then it would not move to 28E, but will go back to 1W?

So, I guess I have:

A)Something up with the cabling?
B)Something up with the motor?
c) Something else?

I am therefore thinking a cable reinstall would sort this.

Hope someone can help.

Thanks
 
Back
Top