0pal
Member
- Joined
- Jan 12, 2006
- Messages
- 4
- Reaction score
- 0
- Points
- 0
- Age
- 50
- My Satellite Setup
-
AXIL AD 600 / 605
Visionic Slim 3 (FTA)
- My Location
- FRANCE
Hi,
I need your help about what type of clone is my receiver ?
You could see down an extract do with Hyperterminal :
DebugPort initialised to 115200, 8, N, 1
fp164.c 990> Success in creating FPI Key monitor Task
Inverted Video..
SIGNATURE=> H/W Major[20] H/W Minor[4]
SIGNATURE=> S/W Major[3] S/W Minor[10]
SIGNATURE=> Manufacturer ID[0xA5]
SIGNATURE=> LoaderText[GMI]
Target Flash MCode = 0x0020
Target Flash DCode = 0x2249
Microcontroller Cut id [43]
Clock Speed [0]
IMAGE_CRC_SUCCESS --> Calc[19C45F68] Exp[19C45F68] ImageSize[ 1179584 ]
Preparing to sSTAVMEM_Init()=Ok
STAVMEM_CreatePartition()=Ok
STEVT_Init()=Ok
STPWM_Init()=Ok
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
src\pti\ptiinit.c 389> PTI interrupt level 6
src\pti\ptiinit.c 405> Suceesfully enabled the PTI interrupt
PTI_Init()=Ok
STCLKRV_Init(CLKRV2)=Ok
STCLKRV_Open(CLKRV2)=Ok
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 1)=Ok
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
STE2P_Init(EEPROM) Size[8192]=Ok
flashdrv.c 1920> Flash Driver Init OK
vpwmctrl.c 229> Install PWM interrupt 11 at level 1
================================================== ========
|| ||
|| eGOS Version 3.2.32. 0 ||
|| ||
|| PLATFORMID 551x Date Dec 16 2004 Time 00:04:28 ||
||
|| (c) Suresoft Systems Pvt. Ltd., ||
|| ||
================================================== ========
Default Resource Disabled - Enable Options and Recompile for usage
, 21471 Info> Device 'OSD0' initialised
fp164.c 1004> Success in creating FPI Key monitor Task
Summary of SDB:-
==============================================
Name BlkStart PLStart #Records
==============================================
Lnb 7FE30018 7FE30028 16
Satelli 7FE30068 7FE30078 6
Carrier 7FE30138 7FE30148 313
Service 7FE32D4C 7FE32D5C 1428
Osl 7FE3DFDC 7FE3DFEC 1428
==============================================
ndbinit.c 175> Valid eDVBE. No_Init
***************************** MPEG - ModuleInfo *****************************
Platform Id - STi5518
Toolset Used - DCU 1.8.1
Compiled On - May 09 2005 at 16:40:41
MPEG Module Version - Ver 1.3.20 Rev.0
************************************************** ******************** *****
___ eIRRXVer3.1.1.0 May 09 2005 16:41:01 ___
######## AFTER MMI CREATE()
API_InitCommand() : macros registrations ok
PWM_InitCommand() : macros registrations ok
==============================================
SSS_GMI/5518
(c) Suresoft Systems Pvt Ltd.,
Version of May 09 2005 at 16:39:50
Built for Chip STi5518 in board CPU Clock Speed = 60750000
==============================================
Heap Remaining : Start[C044CFF0] End[C047DBF0] Size[199680]
Heap Remaining In SYSTEM PARTITION: Start[C00BAC04] End[C02BAC04] Size[2097152]
================================================== ==============
eDEMOD - S - STv0299 v1.1.1.0
Date: Jun 16 2004 Time: 09:37:59
( c ) Suresoft Systems Pvt. Ltd.,
==========================================
sss0299.c 4278> TUNER (STV0299) Module Initialisation
Creating TUNER module semaphores ...
0/12V Control by CPU PIO[20010000] [02]...
LNB Power Control by CPU PIO[20010000] [40]...
LNB Polarisation Control by CPU PIO[20010000] [10]...
Selecting Tuner ... Type[12] Addr[C0]
nsfilter.c 3863> SECTION FILTER Driver version[HWC_SFILTER_55xx/3.0 Apr 19 2005
19:47:05.]
nsfilter.c 4015> Creating SFILTER MONITOR Process @[9] WS[8192]
nsfilter.c 4095> Succesfully Installed SFILTER module
============================================
NDB Ver 1.8.15 built on May 02 2005 18:04:40
NAVDVB Ver 1.2.10
BUILDER Ver 1.2.13
STORAGE Ver 1.2.4
MEMORY Ver 1.2.2
DEBUG Ver 1.0.3
============================================
ndbfcm.c 4512> Database successfully initialised
gbltimer.c 407> GblClkTimer Successfully Created
************************************************** ********
eTTXT - 5.4.8 (67359)
16/03/2005
************************************************** ********
TELETEXT_InitModule() = OK
watchdog.c 697> Created the WD_Thread @12 Stk[4096]
S owe have :
- A STi 5518 with ref. M29W160EB
- A HYNIX : HY57V641620HG
Pleaz help me to found the software to use......
Thanks a lot
0pal
I need your help about what type of clone is my receiver ?
You could see down an extract do with Hyperterminal :
DebugPort initialised to 115200, 8, N, 1
fp164.c 990> Success in creating FPI Key monitor Task
Inverted Video..
SIGNATURE=> H/W Major[20] H/W Minor[4]
SIGNATURE=> S/W Major[3] S/W Minor[10]
SIGNATURE=> Manufacturer ID[0xA5]
SIGNATURE=> LoaderText[GMI]
Target Flash MCode = 0x0020
Target Flash DCode = 0x2249
Microcontroller Cut id [43]
Clock Speed [0]
IMAGE_CRC_SUCCESS --> Calc[19C45F68] Exp[19C45F68] ImageSize[ 1179584 ]
Preparing to sSTAVMEM_Init()=Ok
STAVMEM_CreatePartition()=Ok
STEVT_Init()=Ok
STPWM_Init()=Ok
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
src\pti\ptiinit.c 389> PTI interrupt level 6
src\pti\ptiinit.c 405> Suceesfully enabled the PTI interrupt
PTI_Init()=Ok
STCLKRV_Init(CLKRV2)=Ok
STCLKRV_Open(CLKRV2)=Ok
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 1)=Ok
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
STE2P_Init(EEPROM) Size[8192]=Ok
flashdrv.c 1920> Flash Driver Init OK
vpwmctrl.c 229> Install PWM interrupt 11 at level 1
================================================== ========
|| ||
|| eGOS Version 3.2.32. 0 ||
|| ||
|| PLATFORMID 551x Date Dec 16 2004 Time 00:04:28 ||
||
|| (c) Suresoft Systems Pvt. Ltd., ||
|| ||
================================================== ========
Default Resource Disabled - Enable Options and Recompile for usage
, 21471 Info> Device 'OSD0' initialised
fp164.c 1004> Success in creating FPI Key monitor Task
Summary of SDB:-
==============================================
Name BlkStart PLStart #Records
==============================================
Lnb 7FE30018 7FE30028 16
Satelli 7FE30068 7FE30078 6
Carrier 7FE30138 7FE30148 313
Service 7FE32D4C 7FE32D5C 1428
Osl 7FE3DFDC 7FE3DFEC 1428
==============================================
ndbinit.c 175> Valid eDVBE. No_Init
***************************** MPEG - ModuleInfo *****************************
Platform Id - STi5518
Toolset Used - DCU 1.8.1
Compiled On - May 09 2005 at 16:40:41
MPEG Module Version - Ver 1.3.20 Rev.0
************************************************** ******************** *****
___ eIRRXVer3.1.1.0 May 09 2005 16:41:01 ___
######## AFTER MMI CREATE()
API_InitCommand() : macros registrations ok
PWM_InitCommand() : macros registrations ok
==============================================
SSS_GMI/5518
(c) Suresoft Systems Pvt Ltd.,
Version of May 09 2005 at 16:39:50
Built for Chip STi5518 in board CPU Clock Speed = 60750000
==============================================
Heap Remaining : Start[C044CFF0] End[C047DBF0] Size[199680]
Heap Remaining In SYSTEM PARTITION: Start[C00BAC04] End[C02BAC04] Size[2097152]
================================================== ==============
eDEMOD - S - STv0299 v1.1.1.0
Date: Jun 16 2004 Time: 09:37:59
( c ) Suresoft Systems Pvt. Ltd.,
==========================================
sss0299.c 4278> TUNER (STV0299) Module Initialisation
Creating TUNER module semaphores ...
0/12V Control by CPU PIO[20010000] [02]...
LNB Power Control by CPU PIO[20010000] [40]...
LNB Polarisation Control by CPU PIO[20010000] [10]...
Selecting Tuner ... Type[12] Addr[C0]
nsfilter.c 3863> SECTION FILTER Driver version[HWC_SFILTER_55xx/3.0 Apr 19 2005
19:47:05.]
nsfilter.c 4015> Creating SFILTER MONITOR Process @[9] WS[8192]
nsfilter.c 4095> Succesfully Installed SFILTER module
============================================
NDB Ver 1.8.15 built on May 02 2005 18:04:40
NAVDVB Ver 1.2.10
BUILDER Ver 1.2.13
STORAGE Ver 1.2.4
MEMORY Ver 1.2.2
DEBUG Ver 1.0.3
============================================
ndbfcm.c 4512> Database successfully initialised
gbltimer.c 407> GblClkTimer Successfully Created
************************************************** ********
eTTXT - 5.4.8 (67359)
16/03/2005
************************************************** ********
TELETEXT_InitModule() = OK
watchdog.c 697> Created the WD_Thread @12 Stk[4096]
S owe have :
- A STi 5518 with ref. M29W160EB
- A HYNIX : HY57V641620HG
Pleaz help me to found the software to use......
Thanks a lot
0pal