Help Required Need help to programme an iSmart Satellite reciever

[Kevin c Daley]

Hello,

I am new to the disk network and need some help with configuring my iSmart Satelite reciever to be able to pick up channels from two satelite (two LNB on one disk). The box details are as below:

iSmart X10 Turbo 8PSK "NEWEST 2015 VERSION" High Definition PVR Receiver (Full HD) , WiFi Included & JB200 Installed , External IR , HDMI Cable & AV C

 

[Mickha]

If you have two separate LNB's then you probably have a Disecq switch, so the two cables, from your two LNB's, then lead to one cable going to your receiver.
If this is the case then try going into the receivers menu and selecting Diseqc 1.0, or Diseqc A,B,C,D option, then manually scanning in some channels.

 

[BlindFaith]

You better look for help on an US satellite board. Here in Europe we can't receive transmissions from American satellites.
"Turbo 8PSK" is not used in Europe.

http://rickcaylor.websitetoolbox.com/?forum=106995

 

[Kevin c Daley]

OK, I'll give it a try

 

[Kevin c Daley]

You better look for help on an US satellite board. Here in Europe we can't receive transmissions from American satellites.
"Turbo 8PSK" is not used in Europe.

http://rickcaylor.websitetoolbox.com/?forum=106995

ok